JeepForum.com

JeepForum.com (http://www.jeepforum.com/forum/)
-   Vendor Display (http://www.jeepforum.com/forum/f43/)
-   -   Fawkes Fabrications Modular Recovery & Bull Bar Mounts for WJ (http://www.jeepforum.com/forum/f43/fawkes-fabrications-modular-recovery-bull-bar-mounts-wj-1439411/)

Fawkes 11-17-2012 10:50 PM

Fawkes Fabrications Modular Recovery & Bull Bar Mounts for WJ
 
Our new, updated website is now live, and you can purchase directly from the site! Click on one of the links below for details:

In stock and available for immediate shipping:


Bull bar relocation, shackle tab, and MiniMax kits.


WJ Modular Recovery Components
Individual brackets and tabs for adding on to an existing kit.


Recovery Accessories
Shackles, winch plates, etc.


Big news (at least for us): There is a 100% Made-in-the-USA alternative to the cheap Chinese made "Hunter" bull bar that is compatible with our modular mounting system!

Westin brand 2.5" bull bars part numbers 33-1990 (chromed stainless) and 33-1995 (black powdercoated mild steel) will mount directly to our bull bar relocation brackets. The listed application is for WK Jeeps, but after much discussion with Westin's installation techs, the part numbers above *will* work with our WJ kit.

We'll be pursing the possibility of entering into a wholesaler/dealer relationship with Westin so that we can offer their bull bar and our recovery gear as a package. In the mean time, if you have our mounts or are considering a bull bar in conjunction with one of our recovery packages, PLEASE consider buying a Westin bull bar over the "Hunter" brand. Not only are they made in America, the Westin bar is thicker, built straight (a crapshoot with the Chinese made bars), able to mount most 6" lights, and comes with a 5 year (powdercoated) or lifetime (stainless) warranty -including the finish. The cost is roughly twice what the Hunter runs... but it's worth every penny!

------------------------------------------------------------------

Links of interest:

MiniMax comparison and FAQ thread

Installation Instructions

killerWJ 11-18-2012 03:46 AM

Anyone out there have this OEM Mopar bull bar? It's hard to tell from these pics on Ebay how far down it goes, but I like the height and I appears to have additional mounting brackets that are higher up for better rigidity.
http://item.mobileweb.ebay.com/viewi...842&cmd=VIDESC

alfaitalia 11-18-2012 08:13 AM

Quote:

Originally Posted by killerWJ (Post 14473030)
Anyone out there have this OEM Mopar bull bar? It's hard to tell from these pics on Ebay how far down it goes, but I like the height and I appears to have additional mounting brackets that are higher up for better rigidity.
http://item.mobileweb.ebay.com/viewi...842&cmd=VIDESC

I do . See avatar. Originally it was mounted under the front bumper with other stabilising mount points where the tow hook are. I fabbed my own (much stronger) under bumper main mounting points to make it more rigid and to mount it close to the bumper as IMO it stuck out to far and affected approach angle too much. My lower mounts are so strong that I have not got round to making the upper mounts yet but its rock solid with NO movement at all. I will make some upper mounts when time allows and will design them to allow me to keep my front tow hooks which the factory mounts dont.:thumbsup:

killerWJ 11-18-2012 08:36 AM

Quote:

Originally Posted by alfaitalia (Post 14473424)
I do . See avatar. Originally it was mounted under the front bumper with other stabilising mount points where the tow hook are. I fabbed my own (much stronger) under bumper main mounting points to make it more rigid and to mount it close to the bumper as IMO it stuck out to far and affected approach angle too much. My lower mounts are so strong that I have not got round to making the upper mounts yet but its rock solid with NO movement at all. I will make some upper mounts when time allows and will design them to allow me to keep my front tow hooks which the factory mounts dont.:thumbsup:

That's HOT!

Fawkes 11-18-2012 09:57 AM

Gentlemen, I truly appreciate the discussion (and the link to the factory Mopar bar on eBay), but this is our informational thread in the VENDOR DISPLAY forum. ;)

alfaitalia 11-18-2012 03:42 PM

Quote:

Originally Posted by Fawkes
Gentlemen, I truly appreciate the discussion (and the link to the factory Mopar bar on eBay), but this is our informational thread in the VENDOR DISPLAY forum. ;)

Oops, yes sorry about that, forgot what part of the forum I was on!

Fawkes 11-21-2012 10:01 AM

Bump. Brand new website with *functioning* online purchase options now live. :welder:

Fawkes 12-05-2012 07:17 AM

Soft shipping date on orders for everything other than MiniMax crossbars is now December 20th.

If the current timeline on everything holds, we'll be getting the brackets, tabs, and mounts back from the powdercoaters on 12/19, and be dropping them to USPS the following day.

I expect that we'll be getting the MM crosstubes back to ship out before the first of the year.

Fawkes 12-20-2012 01:52 PM

Crazy day.

We got our last set of parts at the powdercoaters today @ 7AM before the snow really hit.

All current non-MiniMax orders have been shipped. I'm hoping USPS pulls through and everyone gets what they wanted by Christmas.

I still anticipate shipping MiniMax orders before January 1.

Fawkes 12-27-2012 07:46 AM

Bull bar relocation & shackle tab packages in stock and ready to ship.

Still waiting to hear back from the coaters on when we'll be able to get our MiniMax crossbars back to ship out

Fawkes 01-04-2013 04:15 PM

Good news:

I just got back from the powdercoaters. MiniMax orders are complete and ready to be boxed and shipped, however…

Bad news:

The coaters used a semi-gloss black with no texture (a mistake on their part). :rantscream:

Unhappy with the lead times that we have been getting with this vendor (who has had this batch of crosstubes since before Christmas), we had already arranged for blasting & coating of the next batch to be completed by a new vendor with firm, one-week turnaround times. Rather than risk another long turnaround for our current vendor to fix the coating to our current spec, we have moved our timetable with the new vendor up, and will absorb the cost.

For those of you willing to wait for another week, we will be running this batch over to the new powdercoating vendor for re- blasting and re-coating with the proper sheen and texture to match the bracketry on Monday, January 7. For those of you who have current orders and wish to have your product shipped ASAP (possibly today), in the black semi-gloss, we are offering a 10% discount and immediate shipping.

If you choose the latter option, you MUST get back to me by 12:00 (noon) on Monday, January 7.

If anyone needs photos to compare the differences, please let me know and I will snap some.

Once again, I apologize for the delay. We want to make sure that our customers are 100% satisfied with the product they get from us, even if that means pushing back shipping dates. With that said, we understand how patient you’ve been, and are more than happy to offer a discount to those folks who would rather have a product with slight cosmetic mismatch now rather than wait.

Fawkes 01-16-2013 12:43 PM

Bump.

Everyone who was waiting has now had their MiniMax packages shipped. EVERYTHING we make is now in-stock and available for immediate shipping.

ZB_WJ 01-20-2013 06:33 PM

Quote:

Originally Posted by killerWJ
Anyone out there have this OEM Mopar bull bar? It's hard to tell from these pics on Ebay how far down it goes, but I like the height and I appears to have additional mounting brackets that are higher up for better rigidity.
http://item.mobileweb.ebay.com/viewi...842&cmd=VIDESC

^^^ Get the Fawke outta here :2thumbsup:

I'm interested in some WJ front recovery in the next few weeks and have to give first shop to a vendor on here. Interested in 2 shackles for the front (non-mopar), possibly a middle receiver. Can you let me know what you got for me?

Thanks,

Zac

Fawkes 01-26-2013 05:08 AM

Bump. Still a few units in stock and ready to ship before the next run. :)

Fawkes 01-28-2013 06:34 PM

Big news (at least for us): There is a 100% Made-in-the-USA alternative to the cheap Chinese made "Hunter" bull bar that is compatible with our modular mounting system!

Westin brand 2.5" bull bars part numbers 33-1990 (chromed stainless) and 33-1995 (black powdercoated mild steel) will mount directly to our bull bar relocation brackets. The listed application is for WK Jeeps, but after much discussion with Westin's installation techs, the part numbers above *will* work with our WJ kit.

We'll be pursing the possibility of entering into a wholesaler/dealer relationship with Westin so that we can offer their bull bar and our recovery gear as a package. In the mean time, if you have our mounts or are considering a bull bar in conjunction with one of our recovery packages, PLEASE consider buying a Westin bull bar over the "Hunter" brand. Not only are they made in America, the Westin bar is thicker, built straight (a crapshoot with the Chinese made bars), able to mount most 6" lights, and comes with a 5 year (powdercoated) or lifetime (stainless) warranty -including the finish. The cost is roughly twice what the Hunter runs... but it's worth every penny!


The time now is 08:45 PM.

Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.