JeepForum.com

JeepForum.com (http://www.jeepforum.com/forum/)
-   Vendor Display (http://www.jeepforum.com/forum/f43/)
-   -   Custom Parts - NalinMFG (http://www.jeepforum.com/forum/f43/custom-parts-nalinmfg-1398320/)

NalinMFG 07-27-2012 03:52 PM

Custom Parts - NalinMFG
 
- Do you need a special part for your project that no one makes?
- Has your Jeep has been modified in a way that off the shelf parts wont fit?
- Is your order too small for your local shops to deal with?

Check out the NEW "Custom Services" page at NalinMFG.com
http://www.nalinmfg.com/Custom-Services_ep_40.html

Have some type of drawing/dimensions prepared to send if you are expecting a quote.

I will be graduating college in December 2012, and would like to see if NalinMFG will be enough to provide for us(my better half is an RN)...because unfortunately 5.25" speaker adapters alone do not pay the mortgage!


https://sphotos-b.xx.fbcdn.net/hphot..._6618804_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...73450270_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...19715741_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot..._4428410_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot..._6868857_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...33_15371_n.jpg

https://scontent-b-iad.xx.fbcdn.net/...45536628_n.jpg

https://scontent-a-iad.xx.fbcdn.net/...71092654_n.jpg

NalinMFG 07-27-2012 03:57 PM

More:

https://sphotos-a.xx.fbcdn.net/hphot...36546688_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot..._1612765_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...59503687_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...27795419_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...32907141_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...63353647_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...33595846_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...29822363_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...74464220_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...01608907_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...11827467_n.jpg

NalinMFG 07-27-2012 04:05 PM

More:

https://sphotos-b.xx.fbcdn.net/hphot..._2038763_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot..._1560777_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot..._4149734_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot..._7837092_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot..._1072986_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...836_6986_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...88396676_n.jpg

austeezy 07-27-2012 05:02 PM

Do you fab bumpers? Specifically aluminum bumpers?

NalinMFG 07-27-2012 07:04 PM

Quote:

Originally Posted by austeezy (Post 13930186)
Do you fab bumpers? Specifically aluminum bumpers?

Yes, I can fabricate bumpers. I have made several in the past, and actually spent the good part of this morning designing a TJ/LJ production bumper.
As for aluminum -I can cut and machine it, but it is beyond the capabilities of my welder(Miller 211 MIG). I would love to get into the world of aluminum fabrication some day, but for now I have to work with what I have.

Very good question, thanks for asking.

austeezy 07-27-2012 07:50 PM

Awesome. If you want to sell one of those bumpers you're designing, pm me. Steel is definitely not a deal breaker for me.

NalinMFG 08-13-2012 05:23 PM

What does your next project need?

NalinMFG 08-16-2012 10:39 PM

Angle grinder storage / organizer / rack

https://sphotos-a.xx.fbcdn.net/hphot...27915672_n.jpg

NalinMFG 09-03-2012 11:37 AM

Happy Labor Day!

bdennison 09-03-2012 12:17 PM

Would be interested in a custom bumper with winch plate and light hook ups I have saw all the ones from everywhere else and the are all pretty much the same and I'm not that guy I have attempt this on my own and o man lol Im betting you could make just what I'm looking for

NalinMFG 09-04-2012 02:18 PM

Quote:

Originally Posted by bdennison (Post 14114517)
Would be interested in a custom bumper with winch plate and light hook ups I have saw all the ones from everywhere else and the are all pretty much the same and I'm not that guy I have attempt this on my own and o man lol Im betting you could make just what I'm looking for

If you can dimensionalize what you're looking for, I can cut/bend/weld it. The less engineering I do, the less expensive it is.

SkippyPB13 09-06-2012 12:49 PM

I'd be interested in a quote when you have time. I'm looking to make a sign to hang from my 10x10 canopy at jeep shows. I'm thinking a standard sheet metal cut out of my design just delete the deer. I'd like to paint it black and maybe put some diamond plate spaced out behind it for contrast? possible around 12x24 or 30" ?? Shoot me a pm when you can. Thanks Skippy

http://i6.photobucket.com/albums/y24...customLogo.jpg

NalinMFG 09-17-2012 07:53 PM

H1 Rock Ring and a generic floor mounting plate.

https://sphotos-b.xx.fbcdn.net/hphot...69812826_n.jpg

NalinMFG 09-18-2012 09:38 AM

Rocker steps (soon to be dimpled)

https://sphotos-a.xx.fbcdn.net/hphot...89346548_n.jpg

NalinMFG 09-19-2012 10:33 AM

https://sphotos-b.xx.fbcdn.net/hphot...05377186_o.jpg


The time now is 01:42 PM.

Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.