Barnes 4WD TJ / LJ Stubby Bumper Steel or 6061 T-6 Aluminum
The Barnes 4WD TJ / LJ (Unlimited) Front Bumper is laser cut from 6061-T6 Aluminum or Steel and is formed on a CNC Press Brake. The T-6 bumper weighs 66% less than our steel bumpers and the 6061-T6 is ultra strong. This is a high clearance bumper that offers the protection that you need without getting in the way on the trail. Our bumper uses ten factory mounting holes (8 on top and 2 on bottom) to attach the bumper to the frame. This design keeps the winch close to the grill for improved protection and low to maximize air flow. The Barnes 4WD TJ / LJ (Unlimited) Front Bumper also will work with Anti Rock type front sway bars and the factory sway bar too as well. Winch mount, hooks and spot light brackets are sold separate. Bumper is sold un-painted.
OffRoad Bumpers - Barnes4WD.com - Off Road Fabrication Parts
The Barnes 4WD Winch Fairlead Mount bolts between your winch and bumper to give you an extra ridge surface to mount your fairlead to. Winch Fairlead Mount is sold un-painted.
Jeep Winch Fairlead Mount Barnes4WD.com - Off Road Fabrication Parts
Need Extra light of the night rides? These light mounts brackets will work with your factory spot lights or aftermarket lights. Brackets are sold un-painted.
Jeep Light Mount Bracket Barnes4WD.com - Off Road Fabrication Parts
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|