I made one for my LJ. I moved the seat back 2" so I needed to make my own as I was not sure if the store bought would fit. I made mine from 3/4" plywood and painted it. Cheap and simple. After these pics were taken I filled the screw holes and sprayed it with bedliner. It looks nicer now. 4 5/16" bolts hold it in so I can remove it pretty quick if I want. Took about 1 hour to build. I am a big boy and I can stand on it and jump up and down.
BTW If I were to do it again I would extend the sides up so the top was just below the top of the tailgate. Other than that I am real happy (and confidant) with the trunk.
2006 Solar Yellow Rubicon Unlimited
Jeep Club Member #1340
6 Speed, Hardtop
Mods done: Hurst tee handle, cheap hand throttle, Rokmen Merc front bumper, Warn 9.5 TI winch with 3/8" X 100 worth of Viking yellow rope, DPG OME Ultimate with JKS ACOS up front, Kilby Gas Tank Skid, Kilby Steering Box Skid, Jeep Medic Belly Up, Skidrow Engine Skid, Rockcrusher Diff Skid in the rear, Warn Diff cover in front, , AR Outlaw II's and MTR 12:50/15's, Homemade rear Bumper, Cheap Cobra CB, Puma OBA, Sirius Radio, Locker Defeat, Rockhard cage, Rockmen short corners, homemade tire swing/tailgate hinge affair, Airlift air bags on the rear- - - - - - and more to come!