Advice/help needed for cylinder head
I have an '01 Cherokee 4.0L with what I believe is a cracked cylinder head. The coolant is consistently low and I just looked under the oil cap and found some dreaded milky contaminated oil. The oil dipstick does not show signs of coolant in the pan.
I recently had it serviced for overheating. The head was warped, so the repair shop had it machined and it was put back on with a new head gasket. A few months later, the problem persists (no overheating though).
I am a novice, but would like to try to tackle this.
Any advice or recommendations are greatly appreciated.