South Jersey Driveline Shop? - JeepForum.com

Reply
 
LinkBack Thread Tools
post #1 of 18 Old 03-12-2012, 07:00 AM Thread Starter
timdastis
Registered User
2000 TJ Wrangler 
 
Join Date: Apr 2008
Location: NJ
Posts: 231
South Jersey Driveline Shop?

I'm looking for a place that will do a good job shortening and balancing my rear driveshaft at a reasonable price

thanks in advance


2000 TJ Sport Yellow

4" Franken Lift | 1" Daystar BL | Rancho Shocks | Iggee Seats | Cragar Soft 8s | 35" BFG MT | Yukon 4.88s | Smittybilt XRC8 Winch | AtoZ Front Bumper | Nate 4x4 Rear | KC Daylites | more to come
timdastis is offline  
Sponsored Links
Advertisement
 
post #2 of 18 Old 03-12-2012, 07:16 AM
RedZJ
Registered User
1996 XJ Cherokee 
 
Join Date: Jun 2008
Location: Jackson
Posts: 3,095
Garage
RedZJ is offline  
post #3 of 18 Old 03-12-2012, 07:19 AM Thread Starter
timdastis
Registered User
2000 TJ Wrangler 
 
Join Date: Apr 2008
Location: NJ
Posts: 231
thanks for the link - but that's a little far from me - I'm located just outside of Philadephia

2000 TJ Sport Yellow

4" Franken Lift | 1" Daystar BL | Rancho Shocks | Iggee Seats | Cragar Soft 8s | 35" BFG MT | Yukon 4.88s | Smittybilt XRC8 Winch | AtoZ Front Bumper | Nate 4x4 Rear | KC Daylites | more to come
timdastis is offline  
post #4 of 18 Old 03-12-2012, 10:43 AM
mudboy
Registered User
1998 ZJ 
 
Join Date: Mar 2010
Location: Hammonton NJ
Posts: 693
Henry at "Rebuilt Parts" in pennsauken. His shafts are holding up to crazy amounts of horsepower along with 57" agricultural tires.
Rebuilt Parts Co
2624 Powell Ave Ste 2, Pennsauken, NJ 08110
(856) 662-3252
mudboy is offline  
post #5 of 18 Old 03-12-2012, 05:25 PM
Gary2
Registered User
2012 JK Wrangler 
 
Join Date: Sep 2004
Location: Jersey Shore
Posts: 2,700
I think the place that made my driveshaft was called standard driveline , not sure exactly but it was like the last exit on 42 before it turns into Atlantic City expressway , not far from PA , Blackwood I think was the town . I will have to check and see if I can find out exactly where and what it is called.
Gary2 is offline  
post #6 of 18 Old 03-12-2012, 05:53 PM
Irongrave
Registered User
1992 YJ Wrangler 
 
Join Date: Apr 2005
Location: Flroence
Posts: 1,666
little bit of a drive but you will not find a better dirveline shop then the Axle Exchange. He dose a lot of drag mustangs and supplys more then a few of the hard core north east crawler crowd including current King of the Hammers Eric Miller.

Current
2002 WJ 2wd DD The Illusion of progress part 2
Irongrave is offline  
post #7 of 18 Old 03-12-2012, 09:03 PM
cnshoot
Registered User
2001 XJ Cherokee 
 
Join Date: Aug 2011
Location: stratford
Posts: 35
Quote:
Originally Posted by mudboy
Henry at "Rebuilt Parts" in pennsauken. His shafts are holding up to crazy amounts of horsepower along with 57" agricultural tires.
Rebuilt Parts Co
2624 Powell Ave Ste 2, Pennsauken, NJ 08110
(856) 662-3252
He said it right not sure if that's there new address but they use spicer joints in everything great turn around and will build you what you want great to do business with.

2001 xj limited silver on black.
cnshoot is offline  
post #8 of 18 Old 03-13-2012, 05:39 AM
4x4builder1
Registered User
 
Join Date: Apr 2009
Location: nj
Posts: 8
I second rebuilt parts they've built several driveshafts for me. I actually called fran at standard for a tcase input shaft he was a real ******* I hung up on him, the guy thought I was an idiot for putting a Ford np205 behind a th400 like it hasn't been done a thousand times.
4x4builder1 is offline  
post #9 of 18 Old 03-13-2012, 05:41 AM Thread Starter
timdastis
Registered User
2000 TJ Wrangler 
 
Join Date: Apr 2008
Location: NJ
Posts: 231
Quote:
Originally Posted by Gary2 View Post
I think the place that made my driveshaft was called standard driveline , not sure exactly but it was like the last exit on 42 before it turns into Atlantic City expressway , not far from PA , Blackwood I think was the town . I will have to check and see if I can find out exactly where and what it is called.
I called this guy and he said he doesn't touch driveshafts out of jeeps or junkyards - kind of a d-bag but would have been nice because hes so close to me (I live in Blackwood) - I'm going to try Rebuilt Parts

2000 TJ Sport Yellow

4" Franken Lift | 1" Daystar BL | Rancho Shocks | Iggee Seats | Cragar Soft 8s | 35" BFG MT | Yukon 4.88s | Smittybilt XRC8 Winch | AtoZ Front Bumper | Nate 4x4 Rear | KC Daylites | more to come
timdastis is offline  
post #10 of 18 Old 03-13-2012, 05:43 AM Thread Starter
timdastis
Registered User
2000 TJ Wrangler 
 
Join Date: Apr 2008
Location: NJ
Posts: 231
Quote:
Originally Posted by 4x4builder1 View Post
I second rebuilt parts they've built several driveshafts for me. I actually called fran at standard for a tcase input shaft he was a real ******* I hung up on him, the guy thought I was an idiot for putting a Ford np205 behind a th400 like it hasn't been done a thousand times.
haha glad we can both agree on that - what'd they charge at rebuilt? I called them and they quoted me at $125 - seems a little high for a chop and balance

2000 TJ Sport Yellow

4" Franken Lift | 1" Daystar BL | Rancho Shocks | Iggee Seats | Cragar Soft 8s | 35" BFG MT | Yukon 4.88s | Smittybilt XRC8 Winch | AtoZ Front Bumper | Nate 4x4 Rear | KC Daylites | more to come
timdastis is offline  
post #11 of 18 Old 03-13-2012, 07:08 AM
cnshoot
Registered User
2001 XJ Cherokee 
 
Join Date: Aug 2011
Location: stratford
Posts: 35
All new spicer joints that almost 60 of it in parts

2001 xj limited silver on black.
cnshoot is offline  
post #12 of 18 Old 03-13-2012, 09:10 AM
Demolition_x
Registered User
1994 XJ Cherokee 
 
Join Date: Oct 2010
Location: Brunswick County
Posts: 174
Quote:
Originally Posted by timdastis View Post
haha glad we can both agree on that - what'd they charge at rebuilt? I called them and they quoted me at $125 - seems a little high for a chop and balance
Mr. Driveshaft is close. They are 50 to cut and 50 to re-balance. Same to lengthen plus the cost of the tubing.

This does not include any u joints or anything like that.

When I saw that price I just bought a custom made shaft with new spicer u joints and components which is much beefier then the stock stuff. I used CJ Tatton and had a great experience with them.
Demolition_x is offline  
post #13 of 18 Old 03-13-2012, 06:24 PM
tattooed856
Registered User
2003 TJ Wrangler 
 
Join Date: Oct 2011
Location: Atco
Posts: 146
Someone once recommended Nick Ponte (Pontes Junk Yard) in Mantua. Never used him so can tell you if he is any good.
tattooed856 is offline  
post #14 of 18 Old 03-13-2012, 06:44 PM Thread Starter
timdastis
Registered User
2000 TJ Wrangler 
 
Join Date: Apr 2008
Location: NJ
Posts: 231
I dropped it off at rebuilt - seems like they had a good rep and the guys were real cool inside - thanks for the advice guys

2000 TJ Sport Yellow

4" Franken Lift | 1" Daystar BL | Rancho Shocks | Iggee Seats | Cragar Soft 8s | 35" BFG MT | Yukon 4.88s | Smittybilt XRC8 Winch | AtoZ Front Bumper | Nate 4x4 Rear | KC Daylites | more to come
timdastis is offline  
post #15 of 18 Old 03-13-2012, 09:16 PM
4x4builder1
Registered User
 
Join Date: Apr 2009
Location: nj
Posts: 8
Rebuilt parts was 75 to shorten but that was a shaft that he built a few months prior so not sure if he charges more for ones he hasnt built. On an unrelated note, if your building a new shaft for high HP I have to say Jesse at high angle driveline is best I've done 4-5 wheel stands in my tj with his 1350 trophy truck shaft.
4x4builder1 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
where are all the south jersey wheelers? Just_Jking New Jersey Jeep Forum 59 06-02-2011 03:30 AM
atv trails any in south jersey 88xjguy New Jersey Jeep Forum 3 05-20-2011 10:54 PM
What would it take for south jersey? Onabudget3g New Jersey Jeep Forum 3 04-11-2011 06:40 AM
South jersey tomorrow? 2/20 tkatc New Jersey Jeep Forum 4 02-23-2011 11:05 PM
anyone from central or south jersey going to jeep fundraiser in north jersey for hp? gotmudnj New Jersey Jeep Forum 3 04-23-2010 11:45 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome