|
|
|
|
#61 | |
|
Registered User
|
I'm working this weekend .... so I can't make it
![]()
__________________
Ma pole midagi valesti teinud |
|
|
|
|
|
|
|
|
#62 |
|
BUILT. NOT BOUGHT.
|
ripping apart the xj's in my yard starting... NOW
going to CB around 3 520-9368
__________________
'89 Wrangler, 4.0/AW4, 106" Wheelbase, SOA, custom XJ packs, 2" Body. Front High Pinion Dana 44 w/yukon super-joints, chromo inners and outers, and a Lincoln Locker. Rear Dana 60 w/Yukon 1.5" 35 Spline chomo shafts and detroit locker. 5.38 Yukon Gears. Hydro-Assist, 39.5x18" Boggers on 15x12 RockKrawler's w/ 2.75" of backspacing. Comp cut, tube fenders, custom bumpers and rock sliders, fuel cell, CB, Stewart Warner Gauges, SmittyBilt XRC8 Winch, 140 Amp CS-144 Alternator, Electric Fan, and a cooler of beer. 3897 lbs March 1st, 8pm. WILMINGTON, NC MEET & GREET @ HOOTERS! |
|
|
|
|
|
#63 |
|
Web Wheeler
|
you gonna be at the beach all afternoon and evening? Me and Jenn may ride out there later.
__________________
______ /l,[____], l---L -[]lllllll[] ()_) ()_)---)_) 98 TJ stock for now WWW.FLATLANDROCKCRAWLERS.COM 350 in my YJ..... http://www.jeepforum.com/forum/f12/my-350-swap-518364/ build thread: http://www.jeepforum.com/forum/f22/yj-dana-60-70-build-1122902/ |
|
|
|
|
|
#64 |
|
BUILT. NOT BOUGHT.
|
i was about to give up and just stay here to strip out this xj but i guess i can do that tomorrow.
need anything off this turd before i have it hauled away for scrap metal money? i think ill had to CB in about 45 minutes.... call my cell if you are going to come out... if i don't answer try me on CB channel 4... my phone has been messing up lately..... -Erik
__________________
'89 Wrangler, 4.0/AW4, 106" Wheelbase, SOA, custom XJ packs, 2" Body. Front High Pinion Dana 44 w/yukon super-joints, chromo inners and outers, and a Lincoln Locker. Rear Dana 60 w/Yukon 1.5" 35 Spline chomo shafts and detroit locker. 5.38 Yukon Gears. Hydro-Assist, 39.5x18" Boggers on 15x12 RockKrawler's w/ 2.75" of backspacing. Comp cut, tube fenders, custom bumpers and rock sliders, fuel cell, CB, Stewart Warner Gauges, SmittyBilt XRC8 Winch, 140 Amp CS-144 Alternator, Electric Fan, and a cooler of beer. 3897 lbs March 1st, 8pm. WILMINGTON, NC MEET & GREET @ HOOTERS! |
|
|
|
|
|
#65 |
|
BUILT. NOT BOUGHT.
|
ok so.... i winched the tranny out of the xj and NOW i'm finaly headed to CB
see yall there
__________________
'89 Wrangler, 4.0/AW4, 106" Wheelbase, SOA, custom XJ packs, 2" Body. Front High Pinion Dana 44 w/yukon super-joints, chromo inners and outers, and a Lincoln Locker. Rear Dana 60 w/Yukon 1.5" 35 Spline chomo shafts and detroit locker. 5.38 Yukon Gears. Hydro-Assist, 39.5x18" Boggers on 15x12 RockKrawler's w/ 2.75" of backspacing. Comp cut, tube fenders, custom bumpers and rock sliders, fuel cell, CB, Stewart Warner Gauges, SmittyBilt XRC8 Winch, 140 Amp CS-144 Alternator, Electric Fan, and a cooler of beer. 3897 lbs March 1st, 8pm. WILMINGTON, NC MEET & GREET @ HOOTERS! |
|
|
|
|
|
#66 |
|
Web Wheeler
|
just got back from CB......... damn idiots..... about 100 yards from the entrance there's a buried expedition who's "push button" 4wd didn't work..... and some drunk old guy with a F250 ford superduty on like 33's..... old guy proceeds to pull up to the back bumper of the stuck guy, hooks up a CHAIN
: something told me to stick around....... he throws his truck in reverse, and floors it..... he gets the chain tight then keeps flooring it..... needless to say, he buried it to the axles..... so here these guys sit, with a tight chain between them..... guy in the truck says "i can dig it out!!" he tries doesn't work...... the tires with the power aren't touching much sand anymore.......i say let me winch you out..... he says i need to winch him backwards.....(mind you the chain is on the front of his truck hooked tightly to a buried expedition.....) i say, no you gotta go forwards.... he says are you sure??? UMMMMM YEA. so i hook it up and winch him out enough to get the chain off. he goes on his way.... not so much as a thanks or kiss my a**..... whatever. on to the expedition..... some guy in a dodge was jacklegging around the front of the exped. with a walmart special tow strap.....( the kind with the hooks) about buried his..... i told him he needs to go backwards..... unhook his strap and hook mine to the back...... drop the clutch..... never heard four angry squirrels sound so proud!! they were screaming like they just got some!! 8 or 10 HARD tugs later i'm dragging this dude (who seems to like to turn the wheel and mash the brakes when being pulled out ) off the beach. there was an H-3 watching..... i overheard him say " when he can't get it, i'll get him out"..... once i started dragging him off the beach the hummer guy blew past me with a dirty look.....idiot..... but anyways..... nice to see you guys. need to do it again....OH YEA..... URE SEPT 21-23 BE THERE!!!!!!!!!!!!!!
__________________
______ /l,[____], l---L -[]lllllll[] ()_) ()_)---)_) 98 TJ stock for now WWW.FLATLANDROCKCRAWLERS.COM 350 in my YJ..... http://www.jeepforum.com/forum/showthread.php?t=518364 build thread: http://www.jeepforum.com/forum/f22/yj-dana-60-70-build-1122902/ |
|
|
|
|
|
#67 |
|
Registered User
|
Haha, that's worse than that damn Dodge Avenger that was stuck 15 feet in. And that guy with the Dodge was still wasted this morning walking around asking if someone was gonna pull it out. No tow strap, so he was SOL. I've been planning to do a Uwharrie run in sept so that might work out.
Had a good time chilling with you guys, look forward to doing it again!
__________________
my xj "I Feel Sorry For Jeeps that Don't Go Off-Road" Facebook Group <- specs go over there, man! |
|
|
|
|
|
#68 |
|
Registered User
|
thats funny, that beach is always filled with idiots, one time i went out there and there was a BMW station wagon not even the suv, that thought since it was AWD they could make it out there, not taking into account that they had 3 inches of ground clearance, and they made it part way out the entrance and went to turn around and got buried sideways
__________________
2002 tj sahara 3" lift 35" km2, AtoZ rockers 10k lb winch, 4.56 gears, lock-rites front and rear My jeeps Carolina Offroad Forum Coastal Carolina Offroad East Coast Trail Raiders |
|
|
|
|
|
#69 | |
|
BUILT. NOT BOUGHT.
|
Quote:
i hooked up to him and pulled his 2wd turd out of the hole it dug itself into and we made a u-turn.... i'm pulling him in 3rd gear 4 low steady and smooth when ******* decides to stomp on the gas... SOMEHOW his 2wd catches enough traction that he almost instantly rear-ends me. I see him coming in my rear view so i hit the gas to keep from getting hit (we have a 20 foot strap, he was about 5 feet off my bumper) and no sooner do i start to accelerate so he doesn't hit me that he stands on the damn brakes snaps my strap, lost my shackle, and drove right off the sand.... his beer run turned into a beer / tow strap run. i didn't get a new shackle. an i didn't get any money. this morning i pulled a guy in a pilot out though... got $20 ![]() oh, the icing on the cake.... passed out drunk @ 8pm last night. woke up at about 11 or 12... it was pouring... on me... crappy.... i got soaked along with my blankets and sleeping bag and pillow. HOWEVER, when i woke up from the rain i met the folks who set up camp after i passed out right next to us.... a bunch of guys, a couple lesbians, and a HOTTIE FOR ME! we stayed up partying until damn near 7am... i passed back out drunk and woke up sunburned at 10 or 11..... i just got home and i'm BEAT. -Erik <--- didn't get HOTTIE's number or a beach bj
__________________
'89 Wrangler, 4.0/AW4, 106" Wheelbase, SOA, custom XJ packs, 2" Body. Front High Pinion Dana 44 w/yukon super-joints, chromo inners and outers, and a Lincoln Locker. Rear Dana 60 w/Yukon 1.5" 35 Spline chomo shafts and detroit locker. 5.38 Yukon Gears. Hydro-Assist, 39.5x18" Boggers on 15x12 RockKrawler's w/ 2.75" of backspacing. Comp cut, tube fenders, custom bumpers and rock sliders, fuel cell, CB, Stewart Warner Gauges, SmittyBilt XRC8 Winch, 140 Amp CS-144 Alternator, Electric Fan, and a cooler of beer. 3897 lbs March 1st, 8pm. WILMINGTON, NC MEET & GREET @ HOOTERS! |
|
|
|
|
|
|
#70 |
|
Registered User
|
hey i just got back to wilmington today with my 89 xj! im ready to go play in some mud this week!! who's down??
__________________
2002 tj sahara 3" lift 35" km2, AtoZ rockers 10k lb winch, 4.56 gears, lock-rites front and rear My jeeps Carolina Offroad Forum Coastal Carolina Offroad East Coast Trail Raiders |
|
|
|
|
|
#71 |
|
Web Wheeler
|
i have my front shaft out...... maybe i can come out and be on winch duty tho???
__________________
______ /l,[____], l---L -[]lllllll[] ()_) ()_)---)_) 98 TJ stock for now WWW.FLATLANDROCKCRAWLERS.COM 350 in my YJ..... http://www.jeepforum.com/forum/showthread.php?t=518364 build thread: http://www.jeepforum.com/forum/f22/yj-dana-60-70-build-1122902/ |
|
|
|
|
|
#72 |
|
Registered User
|
I tried to wheel in mayfair today and got rejected by my poor navigational skills.
![]()
__________________
my xj "I Feel Sorry For Jeeps that Don't Go Off-Road" Facebook Group <- specs go over there, man! |
|
|
|
|
|
#73 |
|
BUILT. NOT BOUGHT.
|
engine pulling party tonight at my house!
we had 6 jeeps here last night... how many can we get today?!
__________________
'89 Wrangler, 4.0/AW4, 106" Wheelbase, SOA, custom XJ packs, 2" Body. Front High Pinion Dana 44 w/yukon super-joints, chromo inners and outers, and a Lincoln Locker. Rear Dana 60 w/Yukon 1.5" 35 Spline chomo shafts and detroit locker. 5.38 Yukon Gears. Hydro-Assist, 39.5x18" Boggers on 15x12 RockKrawler's w/ 2.75" of backspacing. Comp cut, tube fenders, custom bumpers and rock sliders, fuel cell, CB, Stewart Warner Gauges, SmittyBilt XRC8 Winch, 140 Amp CS-144 Alternator, Electric Fan, and a cooler of beer. 3897 lbs March 1st, 8pm. WILMINGTON, NC MEET & GREET @ HOOTERS! |
|
|
|
|
|
#74 |
|
Web Wheeler
|
wish i could come help.....BUT it's 8:05 and i just got home from work (went in at 7 this AM).....
![]()
__________________
______ /l,[____], l---L -[]lllllll[] ()_) ()_)---)_) 98 TJ stock for now WWW.FLATLANDROCKCRAWLERS.COM 350 in my YJ..... http://www.jeepforum.com/forum/showthread.php?t=518364 build thread: http://www.jeepforum.com/forum/f22/yj-dana-60-70-build-1122902/ |
|
|
|
|
|
#75 |
|
BUILT. NOT BOUGHT.
|
well we didn't really accomplish much anyway...
actually, we did, it was just all small stuff...... tomorrow after 5 is engine time on ol' red..... -Erik <--- hoping the tow truck will drag this white pos out of here while i'm gone tomorrow
__________________
'89 Wrangler, 4.0/AW4, 106" Wheelbase, SOA, custom XJ packs, 2" Body. Front High Pinion Dana 44 w/yukon super-joints, chromo inners and outers, and a Lincoln Locker. Rear Dana 60 w/Yukon 1.5" 35 Spline chomo shafts and detroit locker. 5.38 Yukon Gears. Hydro-Assist, 39.5x18" Boggers on 15x12 RockKrawler's w/ 2.75" of backspacing. Comp cut, tube fenders, custom bumpers and rock sliders, fuel cell, CB, Stewart Warner Gauges, SmittyBilt XRC8 Winch, 140 Amp CS-144 Alternator, Electric Fan, and a cooler of beer. 3897 lbs March 1st, 8pm. WILMINGTON, NC MEET & GREET @ HOOTERS! |
|
|
|
![]() |
| Thread Tools | |
|
|
|
«
Previous Thread
|
Next Thread
»
|
| Suggested Threads |
|