INLAND EMPIRE!!! Whats your 20? - Page 29 - JeepForum.com
Reply
 
LinkBack Thread Tools
post #421 of 472 Old 09-06-2013, 04:14 PM
Michaelgoesrawr
Web Wheeler
 
Michaelgoesrawr's Avatar
1988 YJ Wrangler 
 
Join Date: Nov 2009
Location: Pinion Hills
Posts: 8,239
Garage
Quote:
Originally Posted by zjake
Hmm they have a few plugs in them so that might be it as well
Haha nah. The Tie Rod Ends. But you should also get the tires balanced before getting an alignment.

I changed the track bar, the tie rod ends(TREs) and the steering stabilizer on the truck. Got the tires rotated and balanced(three were out of balance) and got it aligned. It drives well now


Adopt your pets. Don't shop for them.
Michaelgoesrawr is offline  
Sponsored Links
Advertisement
 
post #422 of 472 Old 09-06-2013, 04:52 PM
zjake
Registered User
1993 ZJ 
 
Join Date: Jul 2012
Location: Beaumont
Posts: 19
Quote:
Originally Posted by Michaelgoesrawr

Haha nah. The Tie Rod Ends. But you should also get the tires balanced before getting an alignment.

I chanced the track bar, the tie rod ends(TREs) and the steering stabilizer on the truck. Got the tires rotated and balanced(three were out of balance) and got it aligned. It drives well now
Alrite I'm kind of wanting to redo the whole steering anyways with an over the knuckle set up
zjake is offline  
post #423 of 472 Old 09-06-2013, 05:12 PM
Michaelgoesrawr
Web Wheeler
 
Michaelgoesrawr's Avatar
1988 YJ Wrangler 
 
Join Date: Nov 2009
Location: Pinion Hills
Posts: 8,239
Garage
Pretty sure rustys has a kit for that. They make a good YJ conversion but I can't tell you about any other ones.

Adopt your pets. Don't shop for them.
Michaelgoesrawr is offline  
post #424 of 472 Old 09-06-2013, 07:43 PM
zjake
Registered User
1993 ZJ 
 
Join Date: Jul 2012
Location: Beaumont
Posts: 19
I'm thinking about building my own we built one for a buddy's xj a while back wasn't too hard just got dimensions from a guy who bought his then cut the pipe welded the nut in a sleeve that was an 1/8 of an inch larger on front and back then welded the the sleeve on to a piece of pipe and put tie rods in then same with the drag
zjake is offline  
post #425 of 472 Old 09-06-2013, 08:57 PM
Michaelgoesrawr
Web Wheeler
 
Michaelgoesrawr's Avatar
1988 YJ Wrangler 
 
Join Date: Nov 2009
Location: Pinion Hills
Posts: 8,239
Garage
Oh cool man. Post up pictures if you do. I'd like to see it.

Adopt your pets. Don't shop for them.
Michaelgoesrawr is offline  
post #426 of 472 Old 09-06-2013, 09:08 PM
zjake
Registered User
1993 ZJ 
 
Join Date: Jul 2012
Location: Beaumont
Posts: 19
Will do man it might be a bit I'm putting the jeep kind of on a back burner getting out of the marines corps and still in the process of trying to get hired on at either cal fire or the sheriffs department
zjake is offline  
post #427 of 472 Old 10-01-2013, 09:23 PM
YJjeeper1
Registered User
1989 YJ Wrangler 
 
Join Date: Apr 2013
Posts: 94
Thumbs up

Over here in Montclair and usually do my offroading around the Lytle creek and cleghorn, been looking for a few more people to off-road with, I'm still mostly stock with 31s but slowly my jeeps building up. So the question is, when's the inland empire jeep forum meet?
YJjeeper1 is offline  
post #428 of 472 Old 10-02-2013, 09:39 AM
Michaelgoesrawr
Web Wheeler
 
Michaelgoesrawr's Avatar
1988 YJ Wrangler 
 
Join Date: Nov 2009
Location: Pinion Hills
Posts: 8,239
Garage
The Roll Call LA thread was talking about a run in a few weeks I think. There are two guys who are pretty active in trying to get runs going.

Plus there are a few people there who are only a few minutes from cleghorn, myself included. Although I probably won't be wheeling at all this year.


Does anyone have a set of TJ shafts lying around? Or solid xj shafts '95+?

Adopt your pets. Don't shop for them.
Michaelgoesrawr is offline  
post #429 of 472 Old 10-12-2013, 07:43 PM
tribal636
Registered User
 
Join Date: Sep 2013
Location: Victorville
Posts: 6
New guy here in Victorville. Just bought a '13 Rubicon 2 dr. I wanna hit Cleghorn tomorrow of anyone is interested.
tribal636 is offline  
post #430 of 472 Old 10-12-2013, 07:49 PM
Michaelgoesrawr
Web Wheeler
 
Michaelgoesrawr's Avatar
1988 YJ Wrangler 
 
Join Date: Nov 2009
Location: Pinion Hills
Posts: 8,239
Garage
Quote:
Originally Posted by tribal636
New guy here in Victorville. Just bought a '13 Rubicon 2 dr. I wanna hit Cleghorn tomorrow of anyone is interested.
Post in the roll call la thread

Adopt your pets. Don't shop for them.
Michaelgoesrawr is offline  
post #431 of 472 Old 10-17-2013, 11:39 AM
ConnerKisiel
Registered User
2000 YJ Wrangler 
 
Join Date: Jun 2013
Location: Chino Hills
Posts: 37
Any good trails in Arrowhead? Other than Deep Creek & Devil's Hole?

-CBK 2000 XJ 4.0L S6
ConnerKisiel is offline  
post #432 of 472 Old 10-17-2013, 08:16 PM
BillGOTD
Registered User
1998 TJ Wrangler 
 
Join Date: Oct 2009
Location: Redlands, CA
Posts: 120
Quote:
Originally Posted by tribal636
New guy here in Victorville. Just bought a '13 Rubicon 2 dr. I wanna hit Cleghorn tomorrow of anyone is interested.
Their are not many runs posted in this section. If you have the time check out the WF CA section. There are always runs bing posted.
BillGOTD is offline  
post #433 of 472 Old 10-23-2013, 12:13 PM
StupendousMan
Registered User
1997 TJ Wrangler 
 
Join Date: Aug 2010
Location: Menifee
Posts: 475
Just a heads up (in menifee) sye and drive shaft for sale. Came off my jeep, sye has not about 1000 miles. Drive shaft unknown miles. DS 16 1/2" X 20" I have a 4" currie lift and worked perfectly. Went to savvy under armor so I needed to go with a ss sye. 240 for both the shaft and sye. Let me know. Thanks
StupendousMan is offline  
post #434 of 472 Old 11-14-2013, 10:11 AM
mike_bfdr
Registered User
1981 CJ8 
 
Join Date: Apr 2013
Location: riverside
Posts: 199
riverside here monroe x colorado

here my scrambler




here's my thread
http://www.jeepforum.com/forum/f22/8...-link-1507615/

MY BUILD-----> http://www.jeepforum.com/forum/f22/81-jeep-scrambler-3-link-1507615/
mike_bfdr is offline  
post #435 of 472 Old 11-15-2013, 05:49 AM
JPi1
Registered User
2008 JK Wrangler 
 
Join Date: Nov 2011
Location: Yucaipa
Posts: 392
If you like jeeps, jeep parts, jeep parts vendors... You shouldn't miss this
Attached Images
 
JPi1 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome