Last night i finally got around to doing the lift gate light.... Now i can trade out book marks with something new i want to do. I decided to go with 2 lights mounted in the corners. Its a good thing that there is a gromet as my cuts were pretty shotty. All in all i think its going to be the most useful. It is really bright and barely drains on the battery. I cant wait to use this camping, cooking while camping, and just really anything im very thrilled. I went with lights from napa 30$. Should have relocated the switch to the underside of where i did mount it. I forgot i wanted to keep a stock look and just got it done lol
I really wish that I had the rear power outlet!! That would make that project sooo much easier!
~ 04 WJ Overland 4.7 HO | Graphite Metallic | Quadra-Drive | Vari-Locks | Bilstein 4600’s | ADDCO Sway Bar | Powerstick Exhaust | RB1 | SuperChips Tuned | Much More to Come ~
~ 04 WJ Laredo 4.0 | Selec-Trac | MBP | OME HD 3" Lift | JKS TB | IRO Front LCA's and UCA's| Bilstein 5100's | Silent Armor 245/70/17's | Custom Front D.S. | Stillen Rotors/Pads | Tow Package w/ 3.73's | Moog HD Steering | Kenwood eXcelon HU | Alpine Speakers, Amps, and Subs | Bilstein SS | Auxiliary Transmission Cooler | Rock Lights | Light Bars | Lots of Cool Stuff ~
Not only today, more like all week, just a little at a time...
1) Replaced 2 poly bushings at axle end with Trail Gear Creeper joints in my front 3-link.
2) Adjusted front pinion angle since the arms were out. (whys it gotta be such a PITA to line those bolt holes back up!?!?!):
3) Installed a new 1.25" heim joint for the top upper on my HD rear upper A-Arm.
IRO 6.5" lift, IRO Front long arms, rear iro adj upper a arm and adj rear lower, custom 4x4 fab front bumper, rough country winch, 15" crager soft 8's, procomp 35-12.50 tire, fenders trimmed KOR light bar, malone roof rack
02WJ Rough Country 4" Long Arm,3/4 spacers added to front,265x70x17C BFG All-Terrain T/A KO 31.8x10.7,super 44 flowmaster,K&N air filter,JKS adj track bar,JKS HD tie rod,JKS HD draglink,RCX dual stabilzer,Mickey Thompson Sidebiter wheels 17x9 4.5"BS,Saguaro4x D-Ring Mounts
Ordered my lift finally. Picked up some bilsteins and a kor stabilizer to complete it. Build thread coming soon.... I promise not more of the same mods everyone does (although I have done most already!)
Pulled the noob card today and accidently pulled my camshaft sensor out, yay for attempting to retime the engine or towing it to the dealer to let them play with it.
Round of applause please..
On a better note, I replaced my oil pressure sending unit, too bad I can't start my engine to see if it fixed my problem lol
[QUOTE=smuggler;13038059]Ah yes that is a common Jeep thing, weird noises after wheelin'. This is how you fix it. You have to go wheelin' again, but in reverse. Once you get done the clunk should be gone.[/QUOTE]