Installed a new front parking brake cable. Took 2 1/2 hours. in addition to the console, had to remove, the passenger side seat, both backseat bottom sections, the Infinity amp. the b-pillar lower trim, and what I believe is the airbag sensor module (will check this out following this posting for the correct noun name) all to allow lifting the carpet to get at the cable run.
This may not be a common event but I use the p-brake every time I park it. Having grown up in salt states...if you every want it, better use it all the time.
Update...was the Airbag Control Module (ACM)..
Wow Man. thats a lot of work, I just front parking brake cable 3 weeks ago
I removed the center CON'' go to the back remove the Amp, and Yep ''' you
have to remove thr rear seats, and the amp, pulled up the carpat half way
up remove the two brackets that hold down the cable ''''crap'''' really a bad
spot, for the brackets, but after that''crap'' it was a piece of cake''
2000 WJ 4.0 NEW 4.6 stroker. W/ 4'' Tera Flex Long arm kit, KING 2.5s w/res front,2.5 Kings w/res Rear,Tom wood front drive, 33 x 15s KM2s, Bassett 15'x8 ,fully addjustible Tera flex Track bar, IRO 3link rear, EBC Dippled & sloted front disks, EBC green stuff pads, Iceland off road fender flairs''.