Sneak peak... pic of Bushwacker's NEW cut-out fender flares!! - Page 59 - JeepForum.com

Reply
 
LinkBack Thread Tools
post #871 of 939 Old 03-25-2013, 09:41 PM
mustangwarrior
Registered User
2001 WJ 
 
Join Date: May 2012
Location: NE
Posts: 279
well this sucks, first it took me 6 weeks to get my wheels that were backordered and had to be powder coated, then another two weeks to get my center cap fiasco figured out, now this, and to top it all off, the warehouse that they "should" be shipped from is seriously 40 min from my house, why am i getting the shaft again lol gonna have to make a phone call in the morning and figure this out


KCCO! -Nick
2001 Jeep WJ, I6, Select Trac, IRO 3", Cooper ST maxx 265-75, 16" Raceline Rockcrusher Wheels, Custom Tire carrier, 30" Seward LED Light bar, rear Aussie Locker
mustangwarrior is offline  
Sponsored Links
Advertisement
 
post #872 of 939 Old 03-26-2013, 11:07 AM
mustangwarrior
Registered User
2001 WJ 
 
Join Date: May 2012
Location: NE
Posts: 279
Well the sales rep that called me wasnt in today but the best answer i could get for now is that they are backordered from bushwacker thats why it will take additional time

KCCO! -Nick
2001 Jeep WJ, I6, Select Trac, IRO 3", Cooper ST maxx 265-75, 16" Raceline Rockcrusher Wheels, Custom Tire carrier, 30" Seward LED Light bar, rear Aussie Locker
mustangwarrior is offline  
post #873 of 939 Old 03-26-2013, 11:22 AM
lance-tek
Registered User
2001 WJ 
 
Join Date: Aug 2012
Location: Indianapolis
Posts: 272
Quote:
Originally Posted by JRobes View Post
I got mine for the discounted price and they shipped directly from 4wd.com as well
how long was your shipping time? I only ordered last week but they billed me Saturday so, I am hoping to see them arriving yet this week... I am looking forward to covering my rust spot and seeing these against my black paint

I will eagerly accept any advice or help I can get. | Built Not Bought # 736
lance-tek is offline  
post #874 of 939 Old 03-26-2013, 12:10 PM
JRobes
Registered User
2004 WJ 
 
Join Date: Apr 2011
Posts: 518
Garage
Quote:
Originally Posted by lance-tek View Post
how long was your shipping time? I only ordered last week but they billed me Saturday so, I am hoping to see them arriving yet this week... I am looking forward to covering my rust spot and seeing these against my black paint
I ordered them on 3/17 and got them delivered yesterday. I have a dent in my front right fender and these are going to cover it very well too I did notice that I might have to trim the flares a little to keep my overland sliders, or remove them (they are rusting through anyways) and order some JCR Stage 3's

2004 WJ Overland, 4.7HO, Quadradrive, 3" OME HD/Bilstein lift
1999 Honda Magna VF750C
JRobes is offline  
post #875 of 939 Old 03-26-2013, 12:55 PM
lance-tek
Registered User
2001 WJ 
 
Join Date: Aug 2012
Location: Indianapolis
Posts: 272
Quote:
Originally Posted by JRobes View Post
I ordered them on 3/17 and got them delivered yesterday. I have a dent in my front right fender and these are going to cover it very well too I did notice that I might have to trim the flares a little to keep my overland sliders, or remove them (they are rusting through anyways) and order some JCR Stage 3's
OK, I ordered a few days after that so, if I am lucky they arrive this week :crossXfingers:

When do you think you'll get them on? I/we want to see pics :-p

I will eagerly accept any advice or help I can get. | Built Not Bought # 736
lance-tek is offline  
post #876 of 939 Old 03-26-2013, 01:20 PM
JRobes
Registered User
2004 WJ 
 
Join Date: Apr 2011
Posts: 518
Garage
Quote:
Originally Posted by lance-tek View Post
When do you think you'll get them on? I/we want to see pics :-p
It might be a while for me yet. I'm still VERY patiently waiting (going on a month) for my OME rear springs which have been on back-order for a while and once I get those i'll be lifting mine. I then want to see what kind of clearance I have and whether or not I'll be able to fit 33" tires with the flares installed.

I'm thinking of going with a 33" AT tire, a new set of rims with 4.5" backspacing, and the OME/Bilstein lift. Do any of you guys see any issues with this? I'd like to have the wheels/tires be matched up with the outer sides of of the flares once everything is said and done. Any advice is welcome

2004 WJ Overland, 4.7HO, Quadradrive, 3" OME HD/Bilstein lift
1999 Honda Magna VF750C
JRobes is offline  
post #877 of 939 Old 03-26-2013, 01:30 PM
ATrueRyno
Registered User
2000 WJ 
 
Join Date: Feb 2013
Location: Lexington
Posts: 45
photo removed I wanted to peek!

No matter what, stay true to yourself and stand up for what you believe in.
ATrueRyno is offline  
post #878 of 939 Old 03-26-2013, 03:52 PM
mustangwarrior
Registered User
2001 WJ 
 
Join Date: May 2012
Location: NE
Posts: 279
Quote:
Originally Posted by JRobes View Post
It might be a while for me yet. I'm still VERY patiently waiting (going on a month) for my OME rear springs which have been on back-order for a while and once I get those i'll be lifting mine. I then want to see what kind of clearance I have and whether or not I'll be able to fit 33" tires with the flares installed.

I'm thinking of going with a 33" AT tire, a new set of rims with 4.5" backspacing, and the OME/Bilstein lift. Do any of you guys see any issues with this? I'd like to have the wheels/tires be matched up with the outer sides of of the flares once everything is said and done. Any advice is welcome
assuming your ome springs will give you around 3" of lift, 33's will be tight, even with cutouts, they will fit but probably won't flex well because the flares only cut the front and back of the fender not the top

KCCO! -Nick
2001 Jeep WJ, I6, Select Trac, IRO 3", Cooper ST maxx 265-75, 16" Raceline Rockcrusher Wheels, Custom Tire carrier, 30" Seward LED Light bar, rear Aussie Locker
mustangwarrior is offline  
post #879 of 939 Old 03-27-2013, 07:13 AM
lance-tek
Registered User
2001 WJ 
 
Join Date: Aug 2012
Location: Indianapolis
Posts: 272
Quote:
Originally Posted by JRobes View Post

It might be a while for me yet. I'm still VERY patiently waiting (going on a month) for my OME rear springs which have been on back-order for a while and once I get those i'll be lifting mine. I then want to see what kind of clearance I have and whether or not I'll be able to fit 33" tires with the flares installed.

I'm thinking of going with a 33" AT tire, a new set of rims with 4.5" backspacing, and the OME/Bilstein lift. Do any of you guys see any issues with this? I'd like to have the wheels/tires be matched up with the outer sides of of the flares once everything is said and done. Any advice is welcome
I'm running 255/70/17s (31.4) right now on 3" lift and it's about at the limit. I'm putting on the flares and going from there. I might have to pull my 3" and go to 5+ in order to add anything larger.

I will eagerly accept any advice or help I can get. | Built Not Bought # 736
lance-tek is offline  
post #880 of 939 Old 03-27-2013, 08:49 PM
mustangwarrior
Registered User
2001 WJ 
 
Join Date: May 2012
Location: NE
Posts: 279
Anyone have an additional pending amount when they shipped?

My card was charged by 4wd which would mean it shipped, but now i have a second pending amount for another $400, still havent gotten ahold of the sales guy yet so making another call tomorrow to get an answer from someone

KCCO! -Nick
2001 Jeep WJ, I6, Select Trac, IRO 3", Cooper ST maxx 265-75, 16" Raceline Rockcrusher Wheels, Custom Tire carrier, 30" Seward LED Light bar, rear Aussie Locker
mustangwarrior is offline  
post #881 of 939 Old 03-27-2013, 09:28 PM
lance-tek
Registered User
2001 WJ 
 
Join Date: Aug 2012
Location: Indianapolis
Posts: 272
Quote:
Originally Posted by mustangwarrior View Post
Anyone have an additional pending amount when they shipped?

My card was charged by 4wd which would mean it shipped, but now i have a second pending amount for another $400, still havent gotten ahold of the sales guy yet so making another call tomorrow to get an answer from someone
Just the original charge on my account. If you have two for the exact amount, some companies & banks will put a hold on the money (CC or Debit either way) and then when the actual charge happens/is approved they make a new transaction and the original "hold" goes away and the funds are released. Gas stations usually do this too but only for small amounts like $1.00 just to make sure the card is valid.

I travel a lot for my job and run into people who have horror stories about accounts getting messed up because of things like this.

I will eagerly accept any advice or help I can get. | Built Not Bought # 736
lance-tek is offline  
post #882 of 939 Old 03-27-2013, 09:55 PM
mustangwarrior
Registered User
2001 WJ 
 
Join Date: May 2012
Location: NE
Posts: 279
I'll give it a couple of days to see what happens, but still calling tomorrow to see whats up with my order anyway, odd thing is, the pending amount is the exact amount for my order and the charged amount is $2 less, i'm not sure why i've been having some much trouble with sites lately ordering online

KCCO! -Nick
2001 Jeep WJ, I6, Select Trac, IRO 3", Cooper ST maxx 265-75, 16" Raceline Rockcrusher Wheels, Custom Tire carrier, 30" Seward LED Light bar, rear Aussie Locker
mustangwarrior is offline  
post #883 of 939 Old 04-02-2013, 11:02 AM
lance-tek
Registered User
2001 WJ 
 
Join Date: Aug 2012
Location: Indianapolis
Posts: 272
I'm kinda bummed that mine haven't made it to me yet. I live only 6 hours from the WH where they shipped but after 9 days... still no flares

Hopefully soon they'll arrive...

I will eagerly accept any advice or help I can get. | Built Not Bought # 736
lance-tek is offline  
post #884 of 939 Old 04-05-2013, 10:38 AM
lance-tek
Registered User
2001 WJ 
 
Join Date: Aug 2012
Location: Indianapolis
Posts: 272
I found out today that my flares don't even exist yet...

I called 4WD because I ordered over two weeks ago and I hadn't seen my order be delivered yet. After putting me on hold they came back and told me that as a company they don't have any shelf stock, Bushwacker doesn't have any stock and that it will be another week before Bushwacker gets them produced to ship them out to me. So, with any luch I will get them on April 19th. I was hoping to put them on this weekend or at least get everything marked and start cutting. I guess I'll have some free time on my hands

I will eagerly accept any advice or help I can get. | Built Not Bought # 736
lance-tek is offline  
post #885 of 939 Old 04-05-2013, 01:38 PM
Quadratec
Vendor
 
Quadratec's Avatar
2007 JK Wrangler 
 
Join Date: Sep 2007
Location: West Chester, PA
Posts: 466
Down to my last 4 sets...
We will match a competitors delivered price (please provide any links and/or coupon codes)

Quadratec Web Team

We Price Match,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
me for a quote

Online Hours: 9am-5pm EST Monday - Friday


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Quadratec is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
wj fender flares jrwporkchop WJ Grand Cherokee Forum 13 03-29-2012 07:48 PM
fender flares? waterboy45661 WJ Grand Cherokee Forum 5 03-05-2012 07:25 PM
Wj Fender Flares???? SteelBlue_WJ WJ Grand Cherokee Forum 37 10-06-2011 03:25 PM
ZJ fender flares ......... icecool742 WJ Grand Cherokee Forum 4 06-09-2011 08:08 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome