Help disassemble TIPM
I need to open this and inspect flood damaged tp from my Jeep kk 2012. Any ideas?
There are four clips holding it in on the corners. Undo those and the power cable (yellow?).
Lift up the tipm and disconnect the harnesses underneath.
I removed TIPM by pressing the 4 tabs and disconnecting the wiring harness to TIPM. I wanted to open the plastic case and look at the PCB. ronjenx wrote an excellent article about TIPM TIPM http://www.jeepforum.com/forum/f96/o...study-1200238/ and he disassembled all the PCB, however I am not able to do the same. There are several latches needs to be unlocked at the same time. It is hard to unlock without damaging the TIPM. So I was wondering if anyone out there successfully opened TIPM and put it back in working condition? Are there any special tools out there to open up the plastic case?
|The time now is 05:59 AM.|
Powered by vBulletin Version 3.8.8
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.