Jeep Enthusiast Forums banner

Blend door actuator?

573 views 0 replies 1 participant last post by  AirborneKK 
#1 ·
I know there have been posts on this before as I've searched the forum before for this topic. Long story short I want to make sure I have the correct part I need. PN:68004016AA. This part number is for the heater blend door actuator. When I turn my heater control switch to floor hot air blows out the defrost. No obvious signs of a vacuum leak anywhere that I can see in the engine bay. All other hvac controls function (fan speed, temperature). I crawled underneath to get a look at both actuators it appears the top one is the culprit of my problem but I'm just not sure. Bottom line is I either have air from the front vent or defrost. No floor, floor/face, or floor/defrost. Am I on the right track replacing this part or no? I live in Alaska so no heat on my toes is killer on long drives. Any help would be much appreciated. Thanks guys
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top