|Transfer Case:||Yes with front PTO|
|Front Axle:||Closed Knuckle 30|
|Rear Axle:||44 flanged|
|Axle Gear Ratio:||not sure|
|Recovery Gear:||PTO WINCH|
|Accessories:||PLOW, Painless wiring harness|
Willy been with us for about 15 years now. I chased the previous owner for a dozen years with notes asking when i can make him an offer. Eventually we got it for $450 with a working plow.
The motor and clutch are still holding up. Last winter I did a Pain (in the A**) wiring kit. Also drilled and tapped out the rear most exhaust manifold bolt. That was fun, considering I drilled into the water jacket behind the bolt. Re-cored the original radiator and had the grill acid dipped.
Some day we'll invest in correct low-back seats and proper tires....
And the 2 piece driveshaft for the PTO needs a center carrier section.
So, Willy is reliable and always fun to drive. And when there's snow, we're ready to drive out the garage and manage the farm!