|Transmission:||Borg T-18 4 speed|
|Transfer Case:||Dana 20|
|Axle Gear Ratio:||4:10 (factory was 4:88)|
|Recovery Gear:||Ramsey 8000 front PTO winch|
|Future Modifications:||Excellent candidate for frame-off|
12K original miles. Served on WY cattle ranch. The winch was used to service water well heads. Factory optioned with the "Bullet Proof" T-18 to accomodate the winch. We changed the 4:88s to 4:10s to get better road speed. Only body part we had to change was the cargo floor as they had used it to haul bags of caustic to service the wells. Orig had a Myers 1/2 cab which we changed for a nos Whitco top and roll bar.