|Transfer Case:||Dana 20|
|Front Axle:||Dana 44|
|Rear Axle:||Dana 44|
|Axle Gear Ratio:||3.73|
|Recovery Gear:||tow rope, phone numbers of all my buddies with 4x4s|
|Accessories:||snow plow, tool box|
|Future Modifications:||4-6 inches of lift, 35s|
I use this truck to drive to school and back, and to push snow in the winter months. The original motor was a 360, but the previous owner swapped in the 401. It has a Holley 4 barrel fuel injected carburetor, Edelbrock intake manifold, and I've been told a little hotter cam. I've pushed so much snow with it that I've twisted off axles, snapped both front knuckles, and even snapped the large beam that connects the plow to the frame rail of the truck, earning it the nick name "The Beast."