[FATHERNSON]

I am fairly new to this, so forgive me if this is a stupid question. But I plan to use bondo-glass on my welds and larger areas and then top coat with evercoat rage. Is there a problem with this? Anyone had any experience? Thanks in advance for the help.

[slowlowford]

By Bondo-glass do you mean fiberglass or the filler fiberglass mix? I like to use something like Evercoat's everglass over my welds, then just use normal filler over it. I am a Evercoat fan. Hope this helps.

[FATHERNSON]

Its does help. Thanks. This is what the add says about bondo-glass (Bondo-Glass is a unique reinforced filler containing short, interlocking fiberglass strands and fibers that make it twice as strong as regular body filler) The reason I ask is that I alread have a quart of this stuff. I do plan on using Evercoat Rage as my top coat. Any idea is this would work ok? Or should I get the Everglass to make sure they are compatible?

[GlobexMike]

They will be fine together. I love evercoat stuff we use it all the time in the shop. The evercoat rage is a really great filler. Flows very nice and sands easy. We use their glaze as well as the final coat before primer and that stuff is just amazing.

[slowlowford]

We are talking about the same stuff. I have used the bondo stuff. It works, But is a B**ch to sand. I usually use a grinder with 80 grit to rough it out. You will love the rage, like above said: it sands great and lays smooth. You will be amazed how much sand paper you save too.

[rubiconhd]

using rage filler you don't have to use glaze that is the benefit in buying the rage.

[srdart67]

evercoat makes short strand fiber glasss like the bondo glass but better. its easier to work with, sands better, lasts longer and adheres better. there is a reason bondo brand is sold at Kmart! I use Rage gold every day and then cover coat it with evercoat glaze coat #100417 and it is the best process with the best products I have found yet.