post #1 of Old 09-23-2008, 12:34 PM Thread Starter
Zennashton
Registered User
2005 TJ Wrangler 
 
Join Date: Apr 2007
Location: Tn
Posts: 478
Advanced Adapters Transfer case Linkage bracket

This bracket removes the linkage from the body and places it on the transfer case where it should have been all along. Install takes about 2.5 hours and the final result is a better shifting transfer case.

Zennashton is offline  
post #2 of Old 09-23-2008, 12:37 PM Thread Starter
Zennashton
Registered User
2005 TJ Wrangler 
 
Join Date: Apr 2007
Location: Tn
Posts: 478
Advanced Adapters Transfer case Linkage bracket

Well worth the time spent to install. Removes the problem ridden body mount linkage.
Zennashton is offline  
post #3 of Old 03-16-2009, 03:41 PM
ScottHarr_TJ
Registered User
2010 WK 
 
Join Date: Apr 2007
Location: Georgia
Posts: 727
Advanced Adapters Transfer case Linkage bracket

No more Knocking! im happy with it and it beats the 200 bucks for the novak
ScottHarr_TJ is offline  
post #4 of Old 08-13-2009, 03:57 AM
zachjf
Registered User
1998 ZJ 
 
Join Date: Jun 2008
Location: Portland
Posts: 1,066
Once you get over the initial frustration of having to pull the 2 factory studs out to install the included longer ones the install is relatively easy and worth the effort. The bracket is pretty much bulletproof and I'd go as far as saying over built but it does the trick without any of the pivot point drop bracket nonsense that most body lifts include to "band aid" a defective factory design. Install took me about 1 1/2hrs from start to finish with basic hand tools. Lastly, spend the money and buy a new shift bushing kit when you do the swap, its cheap and new parts make all the difference
zachjf is offline  
post #5 of Old 01-15-2010, 07:03 PM
clety
Registered User
1992 XJ Cherokee 
 
Join Date: Jan 2010
Location: hazleton/pa
Posts: 14
now you can buy this bracket or you can just make one like i did if you have experience in fabracation and welding..
clety is offline  
post #6 of Old 04-16-2010, 09:13 PM
petegall79
Registered User
2006 TJ Wrangler 
 
Join Date: Aug 2009
Location: Southern NH
Posts: 64
Install was easy. Only complaints are my non-dainty fingers and arms.

Did NOT have to extract the studs and use the ones provided. I have a 2006 X TJ. It's black and shiny too.

Realigning the t-case shifter was not difficult. It'll be required unless... well, it'll be required. Manually dropped into 4Lo with the retaining bolt loose, put shifter into same, and then tightened bolt. Shift action is smooth afterward.
petegall79 is offline  
post #7 of Old 08-10-2010, 01:28 PM
93ZJ_5.2_ca
Registered User
2002 TJ Wrangler 
 
Join Date: Feb 2008
Location: Santa Ana-CA
Posts: 115
thanks!!
93ZJ_5.2_ca is offline  
post #8 of Old 12-02-2010, 08:20 AM
bairy
Registered User
2006 LJ Wrangler 
 
Join Date: Aug 2006
Location: Murrieta CA
Posts: 1,370
Installed the Advance Adapters bracket yesterday on a friends jeep and it was great.
  1. Dropped the belly pan
  2. Removed the 4 bolts on the transmission tunnel after peeling the carpet back
  3. Removed stock bracket and moved the bushing to the advanced bracket
  4. Removed two nuts off the transfercase (gearwrench made this easy)
  5. Inserted bracket between the stock one and the transfer case and replaced the nuts
  6. re-did the last step because I realized I needed to insert the jackshaft rod into the new bracket before installing
  7. Adjusted linkage
  8. ENJOY!

Install was really easy and no more binding with mismatched drivetrain/body height. Cutting or grinding /welding the bracket to fit more applications would be really easy. I did not need to use the extended studs.

2006 LJ Claytonized
1999 TJ stockish
1987 J20
bairy is offline  
post #9 of Old 09-12-2011, 04:51 PM
nottusyeroc
Registered User
2006 TJ Wrangler 
 
Join Date: Mar 2010
Location: Farmingdale
Posts: 466
i can shift my trans case
nottusyeroc is offline  
post #10 of Old 10-18-2012, 08:31 AM
Chuck_WeZy
Registered User
1997 TJ Wrangler 
 
Join Date: Apr 2006
Posts: 14
Good quality and never gives me any issues. Does require bending up the linkage yourself but if you really can't heat and bend a rod of metal to roughly the same shape as a guide then Jeeping isn't really for you. Jeeps probably should have never had the linkage mounted to the body anyways.
Chuck_WeZy is offline  
post #11 of Old 11-27-2012, 06:54 PM
CharlieHo
Registered User
2006 TJ Wrangler 
 
Join Date: Apr 2008
Location: Fairmont
Posts: 685
I installed this without dropping my skid, that was a PITA!

The included 3/8" hardware was the wrong pitch, I ended up making my own studs.





After a few months of use... Yes this bracket works, but, I will be upgrading to the Novak cable system soon.

Last edited by CharlieHo; 07-24-2013 at 09:15 AM. Reason: Added info
CharlieHo is offline  
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
Advance Adapters Drive Shaft Angle Reduction Kit (Slip Yoke Eliminator) northjeep SYE Kits 107 10-12-2013 06:40 PM
Advanced Adapters/Tom Woods NP231 SYE Kit w/ drive shaft bradanslinger SYE Kits 55 09-27-2013 09:56 PM
advance adapters atlas 2/II 5.0 CamposZJ Transfer Cases 11 12-10-2012 05:43 PM
Advanced adapters Atlas II Echoman Transfer Cases 16 07-12-2012 03:11 PM
Skyjacker T-Case Shifter Bracket Saubaer Transfer Cases 4 06-20-2009 07:48 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome