Price: $499.00
Pros: Fully assembled
Cons: Pricey- false 10yr warranty
Recommended? No

Comments: The "new" Alloy USA sucks.
Paid the higher price for this brand due to the 10yr warranty. Purchased a front set for a TJ from Alloy USA before it was bought out by Omix-ADA. I recently tried to warranty the axle due to joint failure which dammaged axle ends. You must communicate with the retail dealer which relays info back to the manufacturer. The manufacturer only allows 5% of the Alloy USA purchases to be allowed for warranty returns. So if the retailer only sold $1000.00 of product they were allowed to credit $50.00 toward warranty claims.
Needless to say I was denied a replacement. If you already have a set of the Alloys replace the junk X-Joints. You would be better off spending your hard earned cash on a set of Superior brand axles.
I think it is sad that a company can be acquired and continue to use a reputable name but not continue to uphold their values. The corporate dollar rises above customer satisfaction and a quality product.

Price: $599.00
Pros: Much larger and stronger outer stub shafts compared to stock
Cons: 30 spline outers requred new unit bearings. Makes it harder to Borrow an axle if one breaks on trail.
Recommended? Yes

Comments: Added Alloy USA chromolly shafts with 30 spline outers and new unit bearings. Alloy X-joints wer junk so I replaced them with CTMs. Very happy now.

Price: $350.00
Pros: easy to install, very strong, and not a bad price
Cons: None so far.
Recommended? Yes

Comments: If your a hard wheeler like me, alloy axels are a must. im runnin 35" tires, and im confedent i could probably run 37s or even 38s. great investment.

Price: $700.00
Pros: easy to install, havent broken them yet
Cons: none so far.
Recommended? Yes

Comments: Would highly recommend these to any Rubicon Owner. a little expencive but its a cheap price to pay for dependability.

Price: $538.00
Pros: Haven't broken them yet.
Cons: Havent had them long enough to make a con.
Recommended? Yes

Comments: So far so good. The price was higher than most, but the no questions asked lifetime warrantee was what sold me.

Price: $500.00
Recommended? Yes

Comments: So far so good. Don't think I'll have any problems with them. 75 character minimum

Price: $499.00
Pros: much beefier than stock
Cons: umm is the qc guy blind? no hole for the cotter pin on outer stub
Recommended? Yes

Comments: when I installed them I realized that the hole for the cotter pin on the shortshaft was never drilled, besides that they seem good.

mine never came with the u-joints installed is this something that has recently changed?

Price: $485.00
Recommended? Yes

Comments: Feel that alloy strength! Only 3 trips with them so far, no problems yet. THey come installed with new spicer 760's which is nice.

Price: $1,383.00
Recommended? Yes

Comments: Don't know - drove it home! Front & rear chromoloy were $1383 - included axle seals.

Price: $1,000.00
Recommended? Yes

Comments: I purchased a set of the Alloy axles from Northridge 4x4, after the total destruction of both front axles on a wheeling trip. I have since then put about 30K miles on the axle set, and put a far harder beating on them. I have had no issues, and no failures! These things are worth evry penny!

Price: $600.00
Recommended? Yes

Comments: still no feedback. I can write something after several trips
....................................

Price: $515.00
Recommended? Yes

Comments: nice stuff 10 yr warranty and comes with spicer joints installed no major problems. Good so far

Price: $600.00
Recommended? Yes

Comments: Very easy to install and much beefier than the stock equipment axles A++++++

Price: $565.00
Recommended? Yes

Comments: using the same joint as a dana 44 they offer brute strength, a 10 year warranty, and the ability to use ctms or similar joints. with a open d30 they withstand heavy abuse and 36" tires

Price: $240.00
Recommended? Yes

Comments: strong as hell havent broke one yet they have held up at tellico and all local trails

Price: $499.00
Recommended? Yes

Comments: Fantastic product. Much stronger than stock. Eliminates the problem of having partial C Clips in axle yokes. If the stock C clips spin they will pop out and bye-bye shafts.

Price: $300.00
Recommended? Yes

Comments: GREAT upgrade for factory Rubicon Dana 44 axles, especially with my 35" tires and Warn HD hubs

Price: $499.00
Recommended? Yes

Comments: Broke one on my first trip out after install, emailed Dave at Northridge and a week later I had a new outer and u-joint. Great customer service both thru Northridge and Alloy.

Price: $250.00
Recommended? Yes

Comments: went in good but i can't say my jeep runs better but i havn't broken one yet.

Price: $550.00
Recommended? Yes

Comments: Great Product