ProComp sells this as a "complete" kit; however expect to spend twice as much money in additional parts as the kit. This kit includes springs, shocks, brake line extension brackets, sway bar ends, bump stop extensions, and a rear track bar relocation bracket. After the kit was installed the Jeep had a severe death wobble. The death wobble destroyed the long end of the tie rod. Both ends of the tie rods were then replaced with an OE parts. To fix the death wobble the following parts were installed: Teraflex front adjustable lower control arms, a Skyjacker duel steering stabilizer, a Skyjacker adjustable front track bar, and a Skyjacker drop pitman arm. Furthermore the rear bump extensions do not work at all. Please note there were no addional ProComp parts installed.
This kit is NOT a complete kit, but was a good way to get the basic parts and learn a lot about death wobble and how to fix it. ProComp=misleading/fail