Comments: After being unhappy with the design of my 8 year old Olympic Rock bumper which at 57" long was just too long and missing items I wanted, I started looking around. After much frustration at not finding exactly what I wanted at a reasonable cost, I contacted Zach at AtoZ Fabrication. After describing what I wanted... a short stubby 44" bumper with a built-in winch mount and stinger, Zach said no problem. A few more items got added, a pair of through-welded shackle tabs and then light tabs for mounting my 8" KC lights.
A short while later, the bumper showed up on my porch. With only a slight ding on the end caused by UPS, I was elated with its very obvious quality. Zach can build a bumper, that is for sure!
The first picture below is what my Jeep looked like before. That bumper is 13" longer than the stubby model Zach made for me.
This next one is between bumpers... for those of you who have not yet had your bumper off...
This is just after mounting the winch and before mounting Zach's very cool anodized polished aluminum fairlead that is ideal if you have a synthetic winch rope.
Here's Zach's aluminum fairlead...
Here's a side shot showing how the light mounts and the overall beefiness of the bumper...
The finished bumper...
Note that this was a custom bumper made exactly as I asked for. Zach was more than willing to go the extra-mile to make sure I was happy with everything and I am. It's an awesome bumper that was built with care and attention to detail. If Zach doesn't have exactly what you want in one of his existing designs, and he probably does already, then contact him for your needs.
This bumper gets two thumbsup...
Here is Zach's website... http://www.atozfabrication.com/catalog/ Zach is also a Jeep Forum vendor so he helps support this forum. He's a good guy and after having installed his bumper, I highly recommend his products and his high quality work!
