post #1 of Old 05-04-2008, 03:59 PM Thread Starter
BrokerDon
Registered User
2003 TJ Wrangler 
 
Join Date: Apr 2007
Location: Orange County, CA
Posts: 61
Currie Enterprises 1" raised heavy duty motor mounts

Currie 1" lifted motor mounts fit 1987-2006 Jeep TJ/LJ/YJ vehicles equipped with the 4.0L 6 cylinder engine.These specially designed motor mounts lift the front of the engine one inch which produces a reduced driveline angle on lifted vehicles. The 1" motor mounts also lift engine fan allowing it line up with radiator shroud properly when the Wrangler 1" body lift kit is installed. Super heavy duty construction with large diameter urethane bushings to absorb vibration. All mounting hardware is included. Semi-gloss black powder coat finish.

http://www.currieenterprises.com/cestore/product.aspx?id=1063

BrokerDon is offline  
post #2 of Old 05-29-2008, 01:14 PM
TJ Flexer
Registered User
2000 TJ Wrangler 
 
Join Date: Jan 2008
Location: East Bangor PA.
Posts: 172
Currie Enterprises 1" raised heavy duty motor mounts

Very nice mounts a little more expensive then others but I feel I needed new motor mounts at the time anyway so it saved me a step
TJ Flexer is offline  
post #3 of Old 07-04-2008, 09:00 PM
apexjeepinjoe
Registered User
2002 TJ Wrangler 
 
Join Date: Oct 2006
Location: Boise
Posts: 1,320
Currie Enterprises 1" raised heavy duty motor mounts

Got my engine up in the bay for my tummy tuck and gave me more room for my Atlas install
apexjeepinjoe is offline  
post #4 of Old 08-27-2009, 01:30 PM
Radar_Sweden
Registered User
2006 TJ Wrangler 
 
Join Date: Mar 2008
Location: Gothenburg, Sweden
Posts: 34
To early to say anytning about the product.
Radar_Sweden is offline  
post #5 of Old 12-21-2010, 06:41 PM
Nicho
Registered User
2006 TJ Wrangler 
 
Join Date: May 2009
Location: Northern NM
Posts: 182
I purchased this to go with my 1 inch BL.
Nicho is offline  
post #6 of Old 05-30-2014, 08:35 AM
99SprintST
Registered User
2001 TJ Wrangler 
 
Join Date: Jul 2008
Location: Marietta
Posts: 170
Installed by Rokmen along with their 1" body lift.
99SprintST is offline  
post #7 of Old 12-26-2015, 10:59 PM
04tangojuliet
Registered User
2004 TJ Wrangler 
 
Join Date: Jun 2015
Location: Lemoore
Posts: 0
I installed the MM about an hour ago... after installing a BL. Took the Jeep on a test drive and everything went smooth. So far so good.
04tangojuliet is offline  
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
Brown Dog Offroad Standard Motor Mounts, not the 1 Sandhara Motor Mounts 29 05-27-2015 04:08 AM
CSF Heavt Duty 3 Row Radiator LCFRJEEP Internal Parts 3 11-06-2013 05:42 PM
Currie Enterprises heavy duty stock height motor mounts BrokerDon Motor Mounts 3 03-24-2010 11:51 AM
Novak SBC Jeep Motor Mounts bdmonist Motor Mounts 3 02-08-2009 09:07 PM
TeraFlex HEMI Coversion mounts JeepSpeedShop Motor Mounts 0 05-26-2008 12:25 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome