Also if i were to do it again i'd do 7/8 shank heims with a 7/8 whole, step it down to a 3/4 bolt so you can run your drag link in double sheer with the tie rod. Thats a much better design but i'm not going back to do it and to spend more money.
Also a 7/8 heim is gonna last a good bit longer than a 3/4 heim. I'm not concerned about breaking a 3/4 heim cause the hitman buggy is running 3/4 heims on its upper links. They hold up, just will wear out faster
no doors, no top, no problems
live in sc? join OffroadSC.com
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.