XJAbuzer's 2000 XJ - Page 2 - JeepForum.com

Reply
 
LinkBack Thread Tools
post #16 of 253 Old 08-19-2009, 07:41 AM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
Quote:
Originally Posted by bigdaddyh View Post
pm sent to OKJT

like the trail rig.

Which CB did you get. Just got my Midland hand held installed.

I bought a el-cheapo Radio Shack mini CB for dirt cheap from a friend of a friend.


I installed my Iron Rock Offroad heavy duty tie-rod and double shear track bar this weekend. I dont have pics as of yet.


Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
Sponsored Links
Advertisement
 
post #17 of 253 Old 08-19-2009, 08:20 AM
jonzer12
Registered User
2000 XJ Cherokee 
 
Join Date: Aug 2006
Location: CANADA
Posts: 623
How did you run your coax cable to your antenna mount?

2000 XJ, 5.5 lift, locked 8.8,SYE, homemade bumper/sliders,skids, other stuff
jonzer12 is offline  
post #18 of 253 Old 08-19-2009, 08:36 AM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
I havent run it yet. I originally bought a 10' cable and found out it was too short. I purchased an 18' cable with a removable end so it can be run through a smaller hole. I plan on running it through the plastic trim peices just below the headliner to the back hatch, then I am going to drill a hole in the hatch to run the cable through

Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #19 of 253 Old 08-19-2009, 10:16 PM
jonzer12
Registered User
2000 XJ Cherokee 
 
Join Date: Aug 2006
Location: CANADA
Posts: 623
No concerns with cable fatigue due to the hatch being opened and closed?

2000 XJ, 5.5 lift, locked 8.8,SYE, homemade bumper/sliders,skids, other stuff
jonzer12 is offline  
post #20 of 253 Old 08-20-2009, 07:10 AM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
I am not nearly as concerned with that as I am tearing the antenna completely off if it were mounted in a different location. The cable is the cheapest part of the entire setup.


I will be running the cable through the same boot that the wiring for the windshield wiper, power lock, and 3rd brake light run through.

Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #21 of 253 Old 08-20-2009, 10:40 AM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
One thing I left out of this thread (by mistake) is the Durango snow plow steering box I added back in April. I have neglected to reinforce the frame at the box and now the frame is creaking and popping at the box. Today I ordered a Treks steering box reinforcement kit and a steering box brace from MORE at Jeepinoutfitters.com.

I also ordered Amsteel Blue 3/8" X 100' rope to replace my badly frayed winch cable.

Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #22 of 253 Old 08-25-2009, 02:25 PM
nfm
Registered User
 
Join Date: Sep 2006
Location: OKC
Posts: 72
looks great man.

i know where to cometo for some help.


OKJT JJStasen

FIRST FEATURED XJ ON SAMS OFFROAD.COM
I WISH I WAS IN A COOL XJ CLUB CLUB ; MEMBER #0001
Quote:
Originally Posted by jmundale
unplug the neg. batt cable and hook it up again. thats what i always do - nothing ever gets better but its so easy... i know itll work one day
nfm is offline  
post #23 of 253 Old 08-26-2009, 07:38 AM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
Thanks bro..anytime you need it, you have my number.


I was replacing the bad bushings on my crappy RE arms yesterday and remembered to grab the camera for a shot of the IRO double shear track bar and the IRO tie rod with the goferit TR flip.







Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #24 of 253 Old 09-14-2009, 12:26 PM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
Just returned back from my Colorado trip on the 12th. I towed a trailer that weighed about 1400lbs with all the gear on it. 700 miles one way, plus another 1000 miles of just plain driving throughout the week, and about 250 miles of off road trails, then the Jeep towed the trailer back. The only thing that caused us any problem was a worn out U-Joint and the guy who aligned my Jeep didnt get the jamb nuts tight and they backed off....I ended up eating up 2 front tires. I changed the u-joint out before it failed completely. I had to realign the Jeep with a tape measure, but no problems after that.


Photos from the top of BristolHead Peak...almost 14,000 feet elevation...







I also ran Engineer Pass from Lake City to Silverton....



Then we took Stoney Pass from Silverton back towards Creede...



The top of the Buffalo Boy Tram above Stoney Pass...




Somewhere on the 4wd road from Wheeler Geological Area to South Fork...



I installed my Amsteel Blue winch line (5/8" x 100') before I left to replace my frayed Smittybuilt cable. I love that rope. No need for gloves anymore.

Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #25 of 253 Old 10-17-2009, 11:47 AM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
Ordered my Iron Rock Offroad Long Arm Upgrade on Thursday. The spare HP Dana 30 I had laying around is in the shop right now getting 4.56 gears. The 8.25 I have in the back yard already has 4.56 gears. All I have to do to it is replace the pinion seal, install my locker, and weld the u bolt eliminator perches and shock mounts on it. Then it will all be installed, then on go the 35” x 12.50” BFG KM2s. I cant friggin wait!!

Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #26 of 253 Old 10-17-2009, 02:01 PM
ajxj9197
Registered User
2009 WK 
 
Join Date: Jul 2008
Location: Bloomington, Illinois
Posts: 1,346
very nice pics. I'd kill to live near that.
ajxj9197 is offline  
post #27 of 253 Old 10-27-2009, 01:40 PM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
Iron Rock long arm showed up today. I will shoot some pics when I get home for the heck of it.

Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #28 of 253 Old 10-27-2009, 09:49 PM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335




Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #29 of 253 Old 03-09-2010, 09:15 AM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
Been a long time since any updates.

Life happened and funds got delayed. I was finally able to get the tires.....picked them up a few weeks ago. Yes, you can fit 4 35's in the back of an 05 WK



35"x12.50"x15" BFG KM2s

I have my high pinion 30 with 4.56" gears sitting in the "workshop" all put together. If everything works out, I will be installing the IRO long arms on Saturday and the 4.56"s will be put in the rear axle along with the Treks U-Bolt eliminator kit the weekend after.

Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
post #30 of 253 Old 03-13-2010, 07:47 PM Thread Starter
XJAbuzer
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 1,335
I got the old axle out today and the new one under it. I dont have it complete yet and it was dark by the time I got the axle in so no picture there until tomorrow. Still have to hook up the steering and swap out the steering knuckles. Then I will align it with my usual driveway alignment. I am getting really good at that....lol. Here is a few pics with it torn apart....






My old LP Dana 30 and Rubicon Express control arms. Glad to see all of that go. The pinion yoke can be wiggled back and forth close to a quarter inch....its pretty far gone.




My Jeep is now almost free of all the crappy RE stuff.

All that is remaining on here is the coils and shocks. The shocks will be replaced very soon because the RE ones are shot to hell. More pictures to come tomorrow.

Abuzed 2000 Cherokee...black -n- blue build

My Youtube Channel

1979 CJ-5 304 V-8, T-150 3 speed, Dana 20, Dana 30 front, AMC 20 rear, Sold

Anyways, I wanna go wheelin'!
XJAbuzer is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
My 2000 XJ JayBanion Jeep Builds 2 11-05-2009 09:51 AM
2000 Tj b_enniss Jeep Builds 4 08-01-2009 12:23 PM
2000 Tj, Wv WVU_TJ Jeep Builds 0 05-05-2009 12:59 PM
2000 Xj missXJ Jeep Builds 0 04-16-2009 09:50 PM
2000 Tj kennyboobear Jeep Builds 15 12-09-2008 07:41 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome