sound bar after recoving it
pulling the covers off
took some hot water and purple power and stuck the overs in there to get all the grease off.
along with wire wheeling the old gasket **** off
then took the front beam out
also cleaned, degreased and undercoated both axles before putting them in.
i didnt take any pics of doing the rear, only reason i replaced it was the old d30 in it had bad bearings and made noise
heres the rear done, had a hell of a time with the leaf spring to body bolts.
while putting my 4wd shifter in i found 5 little bags of what looks like coke under the carpet right nere the gas pedal,
Uploaded with ImageShack.us
i pulled the old trans out and went to change the filter and stuff in the 4wd one and found this
so i scrapped the trans and found one on craigslist from a 98.
also did a rear main seal and oil pan gasket while i was down there.