Someone uploaded a good video today of the pics you see with the big wheelie and the guys standing on rockers. It is incorrectly titled "Flop" If I didnt have the family with me I would have just went for it. It was my fault for taking a bad line to the driverside, the previous obstacle kind of set me up that way. All in all it was my favorite part of the day :P Back left tire was too far up that hill.
87YJ 5.2/46RH/NP231 D44/9in 4.56 4 link rear, radius arm front
My Build http://www.jeepforum.com/forum/f22/daddyjeep-121-day-87-yj-5-2-lcg-4-link-build-1479204/
Start planning for 2014, updated site http://www.bantamjeepfestival.com/
After last Saturdays wheeling trip I am moving 2 items to the top of the list. Cracked manifold is one, god awful brakes is the other. I had to routinely shift to neutral and stand on the brakes to stop on steep declines.
I bought a cardone double diaphragm booster for a 95yj, matching master cylinder. Here is where a friend helped me get creative.
I needed to address the proportioning valve for the rear discs. I grabbed a 98 zj valve with rear discs from the junkyard. It has abs though and a funky mount. We pulled the internals and put them in an xj prop valve. It has a nice bracket to bolt to MC, and the lines on the proper side. Just waiting on the master cylinder to arrive and some time to install!
Threw together another video today, splitscreen of the little pickle I was in last saturday. Of course the software added a stupid watermark to the middle of it. Kind of cool to see both vantages. The split starts at 1:50. Kind of a long video, there was a lot of BS'ing
Got my new MC today. All ready to go on this 95 booster swap. Pictured is the 95 mc and booster, prop valve and bracket from an xj, with the internals from a 4 wheel disc zj prop valve. This was a friends brainchild. Hopefully get it in this weekend.