Welding in my full cage today.
I've decided to rattle bomb it rather than having it powder coated for a couple reasons.:
2, Easy to touch up if/when I scratch it
3, won't have the jeep down for a week waiting for the powder coaters
I'll be going down to my shop where I have a Miller Dynasty 250 Mig welder and a buddy with extencive fab background will be helping me. I'm hoping everything goes smoothly.
My only issue is where to mount the lap belt part of the 4 point harness' that I'm installing. I turned down some 1" bar on the lathe at work, drilled and threaded it to accept 7/16-20 grade 8 bolts. I'll drill into the B pillar and weld these in for the outboard lap belt mounts, but I dunno what I'm gonna do to mount the inboard side. I may just drill a hole in a piece of 2" angle and weld the angle straight to the tub floor... Not sure yet.
Here's the threaded plugs I made for the outboard side. Will get pics with my phone as we go, still can't find my camera.
Lap belt bungs (I made these)
More to come.