-   Jeep Builds (
-   -   Brplatz's TJ "OPV" (

brplatz 07-17-2011 08:48 PM

Brplatz's TJ "Provost"
Current Photo:

PAGE 5 starts the rear end stretch

Bryan did one of these threads to I decided I probably should do one also.

Mid may, after finishing my first year at NMSU, I gave my younger sister my 2001 2wd Xterra, and proceeded to look for a jeep. Doing research I found that I wanted a TJ and found one not much later in Phoenix. After some talks on the phone and many pictures and email, I decided to jump on it. Flew out to Phoenix with my father with some tickets he had accumulated, and picked it up.

First thing we noticed on the ride home, was that it had not rained or snowed in Arizona in about 4 months, but just so happens that it wants to snow, and the Jeeps softop was missing its side windows. Lets just say we came dressed for phoenix weather, and the ride to Flagstaff was cold. Also noticed that due to a drop pitman arm, the Jeep had some of the worst bumpsteer I have ever experienced. White knuckles at 65 for a long, long ride to Albuquerque.

He had put on a Rubicon Express 3.5" Lift and a Tcase drop, evetually replace with a MML or SYE.

This is a photo at Flagstaff, mid snow.

Once I bought it, I knew that the chrome needed to go and fix the bumpsteer. So that was project #1

First chrome to go was the sidesteps and bumpers, as I purchased replacements.

Also bought a stock pitman arm, and a few inner pieces that needed replacing, air vent, shifter boot etc.

Wheeled 4th of July with my Father and his FJ

Then again with Bryan and some other fellow nnmoffroaders

I did consider buying replacement windows for my soft top, but it was Tan/Spice and in poor condition and really wanted black, so I went with a Rampage Fastback Frameless top and man, I love this top. One of the best purchases so far. Also painted the rims, full sanding and cleaning of each rim, 2 coats prime, sand, the 4 coats paint. Came out real nice. Also painted my drums, just cause they looked ugly all rusty.

Also painted the upper sliding doors with a vinyl paint. I was blown away by how close it came out to the top, unless you look extremely close at it, the color looks identical.

Lastly I ordered a locker for the front, Aussie, should be here monday, so this is how she looks as of today.

Hope you like


brplatz 07-26-2011 10:43 PM

Anyway, installed a Locker and Did some lights.

Here are some photos. Got the Aussie all the way in the carrier, then got tired and decided it was bedtime. Would finish tomorow, but going to Ouray for the rest of the week! So sunday Ill finish it all.

Black bear was open till the switchbacks, then because of snow and subsequent mudslides they closed it. Poughkeepsie was open, but my dad didnt want to break his poor Toyota FJ. Hit all the rest of the passes though, Imogene, Engineer, Hurricane, Corxscrew, etc...

Anyway, I decided it was time to wire up my fog lights and do some rock lights. Seemed like a fun project and it actually turned out very well. Picked up a few cheapo lights from Wallyworld and some relays and went to work.

IceCreamMan99 07-27-2011 01:05 AM

Looks like some good, hard, work! Congrats and enjoy!

dustinGERSTEL 01-11-2012 01:06 PM

Brian has a shweeeeet Jeep :)

NYGLT56 03-24-2012 08:03 PM

lmao, it so weird looking at build threads from people you know

dustinGERSTEL 03-26-2012 12:27 PM

Especially after having just gone wheeling with them ;)

brplatz 03-27-2012 10:13 AM

Ill be honest, this build thread is missing alot haha

dustinGERSTEL 03-28-2012 01:50 PM

Brian, flex, Jenny should find some :)

brplatz 07-19-2012 01:04 AM

Ok well this should be a large update :laugh:

Somewhere between the last update and now I got some 35" MTR Kevlars, so the D35 had to go, hello 8.8,

This summer I have been working at a local offroad shop. Overland Motorsports.

Cinco de Baja. Our shop was a sponsor, since the race was in Albuquerque. We also had a race rig, but unfortunately we had overheating issues and were unable to compete.

Next picked up a Teraflex oil pan skid, mainly cause it was on sale for dirt cheap and free shipping.

Picked up my 8.8 and plasma cut off all the brackets.
And Clean

And began the 5.9L V8 swap in my boss's Jeep

New MetalCloak Gamechanger came in for a JK! Just thought $5k in suspension parts was worth a picture haha.

Fathers FJ got 35's

Jig for the 8.8 and brackets going on. Yes the jig is a bit makeshift, but it does work very well.

Little diff cover welding, custom protection.

Shop stretch Jeep finished. TJ to LJ conversion.


Built my rock sliders

My bumper getting some tube love.

My amateur welding skills.

Washed up

Went wheeling

Hiline tube fenders starting soon. Belly up aswell. Going to be saving and planning for some JJs and a 4link/3link.

OhSethiO 07-19-2012 01:29 AM

looks awesome, I have been wanting to build a front bumper almost like that.

brplatz 07-19-2012 01:19 PM

1 Attachment(s)
Thanks man! I really like it haha. Little tube bending and it worked out well

Shop is dirty today, cleanup, no work shall be done haha

dustinGERSTEL 07-21-2012 01:13 PM

Did Marc find all of his bilstein boxes :P

brplatz 07-21-2012 01:18 PM

Hahaha I dunno, must have been 20 bilstein boxs there

dustinGERSTEL 07-21-2012 01:21 PM

Haha, I told him I was going to sell my china shocks and buy the ones he had from him, LOL.

rendell 07-23-2012 02:12 AM

I thought your Jeep looked familiar. It's really coming along. I was at Overland last week when you were there, but I didn't introduce myself. Hit me up the next time you guys go wheeling, I'd love to tag along.


The time now is 04:42 AM.

Powered by vBulletin Version 3.8.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.