JeepForum.com

JeepForum.com (http://www.jeepforum.com/forum/)
-   Jeep Builds (http://www.jeepforum.com/forum/f22/)
-   -   Blue's Jeep Build. Lots of pictures (http://www.jeepforum.com/forum/f22/blues-jeep-build-lots-pictures-1509366/)

HAFICON 04-14-2013 07:54 PM

Blue's Jeep Build. Lots of pictures
 
Hello, my name is James Blue bought my JK back in February of 2012, my only demand to the dealer is that it had to have factory half doors and be a 4 dr. And they had one on the lot 2012 JKU Sport Deep Cheery Red, 4dr,3.73,LSD,Max Tow, rolling on 255/70/18(free upgrade from the 16”). Just what I wanted

http://i677.photobucket.com/albums/v...-57-13_761.jpg

http://i677.photobucket.com/albums/v...-13-16_694.jpg

New as new can be.
http://i677.photobucket.com/albums/v...-59-37_950.jpg

First thing I got started on was building an overhead consul.
http://i677.photobucket.com/albums/v...9-50-52_32.jpg

http://i677.photobucket.com/albums/v...-40-56_210.jpg

The bracket shown above is the bracket attached to windshield frame there the factory strap hoof was.
http://i677.photobucket.com/albums/v...-56-10_697.jpg

Finished product.
http://i677.photobucket.com/albums/v...-04-42_991.jpg

Next came some side armor to help prevent Door dings. I can handle some trail damage but some idiot swinging the door into me will tick me off to no end.
http://i677.photobucket.com/albums/v...withRRStep.jpg

New bumper
http://i677.photobucket.com/albums/v...rontbumper.jpg

Got bored and cut my fenders
http://i677.photobucket.com/albums/v...s/FrontCut.jpg

tossed on my Rugged Ridge 8500lb winch
http://i677.photobucket.com/albums/v...-24-50_146.jpg

Put together a winch bag.
http://i677.photobucket.com/albums/v...-34-31_266.jpg

Plasti dipped doors then put bed liner on top of that to add strength. Came out great has held up great. I like the look of black doors.
http://i677.photobucket.com/albums/v...5-06-46_65.jpg

Sanded and preped the tub for Herculiner.
http://i677.photobucket.com/albums/v...stideready.jpg

http://i677.photobucket.com/albums/v...photos/Dry.jpg

http://i677.photobucket.com/albums/v...Siderolled.jpg

http://i677.photobucket.com/albums/v...ubfinished.jpg

Lifted my Jeep then put it back down.. *L* This was a shop I had free access to anytime until I got transfered.
http://i677.photobucket.com/albums/v...-51-59_324.jpg

Speaker box in the works.
http://i677.photobucket.com/albums/v...-02-41_185.jpg

http://i677.photobucket.com/albums/v...7-30-19_97.jpg

http://i677.photobucket.com/albums/v...-50-39_921.jpg

Amp mounted.
http://i677.photobucket.com/albums/v...1324AA0CC1.jpg

Thanks to a hit and run got a new bumper for FREE
http://i677.photobucket.com/albums/v...os/Compare.jpg

http://i677.photobucket.com/albums/v...rinstalled.jpg

Tire carrier mounted.
http://i677.photobucket.com/albums/v...8287F2787F.jpg

Birthday gift fromt the wife.
http://i677.photobucket.com/albums/v...EF1EC98504.jpg

http://i677.photobucket.com/albums/v...00685CBC43.jpg

HAFICON 04-14-2013 07:54 PM

Got some new Wheels and tires
http://i677.photobucket.com/albums/v...ps51496fac.jpg

http://i677.photobucket.com/albums/v...psfb04f62f.jpg

1st stage M.O.R.E Offroad 1" body lift.
http://i677.photobucket.com/albums/v...ps1152b2d8.jpg

2nd Stage of lift kit. AEV 2.5
http://i677.photobucket.com/albums/v...psd82598b5.jpg

http://i677.photobucket.com/albums/v...ps2c4401e7.jpg

http://i677.photobucket.com/albums/v...ps547cef6a.jpg

http://i677.photobucket.com/albums/v...psf4903ba4.jpg

Front
http://i677.photobucket.com/albums/v...ps6b920151.jpg

As of today.
http://i677.photobucket.com/albums/v...ps579c1c5d.jpg

This is not a complete build thread. Just hitting most of the highlights.

HAFICON 09-02-2013 01:00 PM

Got a little something done this month.

Viair OBA system.
http://i677.photobucket.com/albums/v...ps32a247a7.jpg

Tanks, not to concerned about cargo room I really don't carry anything maybe some camping gear once and a while but that's about it.
http://i677.photobucket.com/albums/v...psd67c823c.jpg

TNT truss system.
http://i677.photobucket.com/albums/v...ps4666651e.jpg

http://i677.photobucket.com/albums/v...ps3d723ffb.jpg

4.88 and ARB Air lockers front and rear. ARB Diff covers, and some JKS Quick Discos. Also have Rock Krawler adjustable control arms and Track bad on order.
http://i677.photobucket.com/albums/v...ps78f6b095.jpg

ZSXJ430 09-02-2013 02:57 PM

Looking great. It is always nice to mod a new vehicle...no rust to mess with.

HAFICON 01-27-2014 11:55 PM

I almost forgot about this. Have not really done much more to it am pretty happy with the lockers and gears. Tossed on a set of front upper and lower adjustable control arms and a Track bar.
http://i677.photobucket.com/albums/v...psade9a837.jpg

http://i677.photobucket.com/albums/v...ps11644e5f.jpg

Replaced the stock fog lights.
http://i677.photobucket.com/albums/v...ps7w9pwky6.jpg

Started building another gauge pod got it almost finished but starting to not like it so much might just order and S-Pod.

Outside of that Just been wheeling it and loving it.

http://i677.photobucket.com/albums/v...ps21ae5d9c.jpg

http://i677.photobucket.com/albums/v...ps70bc199c.jpg

HAFICON 02-15-2014 06:03 PM

Well I got my OBA manifold rebuilt and re-installed I will be running a GowShift PSI gauge with dual sensors so I can read PSI at the tanks and the manifold since they are split systems.

Had to notch the OEM bracket so the regulator would sit right. Have to say I was not a fan of all the plastic on the JKs but it is actually really strong and much easier to work with.
http://i677.photobucket.com/albums/v...ps25574a17.jpg

http://i677.photobucket.com/albums/v...psc95c0716.jpg

I could not get the angle I wanted due to the angle of the plastic for mounting surface, I was going to wait and put a plate in and place it strighter but with all the snow and everythign shutting down I just want to get my lockers back online.
http://i677.photobucket.com/albums/v...ps2731366d.jpg

The line leaving to feed my tanks. Travels through the fender well then into the cab back to the tanks.
http://i677.photobucket.com/albums/v...ps4c8ae083.jpg

Stag 02-17-2014 05:19 PM

You have some good fab skills and got a great looking rig.

HAFICON 02-17-2014 05:58 PM

Quote:

Originally Posted by Stag (Post 20459897)
You have some good fab skills and got a great looking rig.

Thank for the rig compliment. Fab skill well *L* I am an engineer by trade thats about all I got..

HAFICON 02-17-2014 08:49 PM

So I been working on a overhead console and this is the final drawing that is going to the shop, The gauge and switch portion is meant to favor the look of the SPOD, it will hug the natural shape of the inter molding while still clearing the rear view mirror. The location and angle of the CB mount changed as well I have built this section and have test fit it in the Jeep and the CB is visible while allowing a clear line of sight to all switches and gauge. I also reformed the rear mount so detentions in the drawing are exact to the roll bar that it will attach to. I should in theory be able to email the files to the shop go pick it up and bolt it in. For caution and margin for error we are going to wait till we have the Jeep in the shop and built/test fit as we go. Either way I am pretty excited about it cant wait to have it built.

http://i677.photobucket.com/albums/v...psd606f625.png

http://i677.photobucket.com/albums/v...ps76d8043b.png

Front mount will be simply two screw holes as a custom mount is already in place on the windshield frame.
http://i677.photobucket.com/albums/v...pscebdf4d7.png

This would be the drivers point of view if looking up at the console from the drive seat.
http://i677.photobucket.com/albums/v...ps616eebde.png

MoonyJohn 03-28-2014 11:06 AM

Looks like a good plan!

Have any shots of the body lift points? An extra inch would be sweet but I dont want the bumpers to look like they are seperate you know?

HAFICON 03-28-2014 12:52 PM

Quote:

Originally Posted by MoonyJohn (Post 21655753)
Looks like a good plan!

Have any shots of the body lift points? An extra inch would be sweet but I dont want the bumpers to look like they are seperate you know?

Yea I will get some with aftermarket bumpers it is not to bad.. For sure make cleaning a little easier.

HAFICON 05-15-2014 08:51 PM

Got the console almost finished and then bought a hard top, so we have to start over with the console.

http://i677.photobucket.com/albums/v...ps7wvnzwlf.jpg

Upside down shot,
http://i677.photobucket.com/albums/v...psklcxpb6s.jpg

The plan was to finish out the CB box, It was going to be enclosed and a few changes made but never got back into the shop.
http://i677.photobucket.com/albums/v...ps02f4b021.jpg

http://i677.photobucket.com/albums/v...ps40b48818.jpg


Top.
http://i677.photobucket.com/albums/v...pso5szmjot.jpg

http://i677.photobucket.com/albums/v...psn97fi1wo.jpg

Tossed in a Tuffy box.
http://i677.photobucket.com/albums/v...psef6a637c.jpg

http://i677.photobucket.com/albums/v...ps260f3342.jpg

Relocated the air intake for my compressor to inside the cab.

HAFICON 05-15-2014 08:52 PM

Also built a Relay box mount for the Brake booster.

http://i677.photobucket.com/albums/v...psb16934d0.jpg

http://i677.photobucket.com/albums/v...ps1af84a9a.jpg

http://i677.photobucket.com/albums/v...ps018586a2.jpg

Wiring looks bad in these photos. I was test fitting still, now that is is all in wire loom and tucked in it looks much better, all wiring exits the rear of the box towards the firewall.

HAFICON 05-15-2014 08:56 PM

Started drawing a custom tire carrier but have not started a build as of yet.

http://i677.photobucket.com/albums/v...pscd428ccd.png

http://i677.photobucket.com/albums/v...psbd1f84e2.png

http://i677.photobucket.com/albums/v...ps798a6e5d.png

http://i677.photobucket.com/albums/v...ps8d2d16c1.png

ucffootball85 05-16-2014 08:50 PM

nice


The time now is 10:44 PM.

Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.