Thanks Mark. I enjoy it.
I've done a few things lately. Brought it down from home to drive while the niner's getting some rest. The thermostat gasket has been leaking for a while, so I did that today. Ended up replacing the thermostat housing because I buggered it up so bad from hammering it off. The top bolt broke and was corroded to the housing. Found exact replacements for the bolts and housing. Sweet.
Took the all 4 doors off and drove to the lake with my girlfriend. Gonna work on those hinges tomorrow and try to get them off so I can weld in my M10 bolts.
I bought an undercoating gun off of amazon to spray bedliner with. Have some floor pan patching to do before that can happen. Also need to wash the mud out of the interior. Hasn't been cleaned since it got wheeled in October. Gross.
Been working on a new wiring setup. Going to do it up real nice and use a sealed relay box and switch pod somewhere inside. The plan is to use Contura II switches as well, but I might axe that for the sake of cost. Here is what I have so far as far as a wiring diagram. Not done, just something to get started with.