What started out as a rear coil relocation has evolved into a mini build thread for my suspension. Currently running a 5.5" Long arm setup with Rough Country arms, Metalcloak dual-rate front coils, Rock Krawler rear coils, Rancho 9000xl shocks. Got the WJ knuckle swap with a tie rod flip and GM one ton rod ends.
Just ordered 1.25" Currie Johnny Joints for the lower arms, and the front upper link, 1" Joints for the rear upper arms. Got Artec 4 link mounts for the frame side rear, an Artec 8.8 truss and upper link mounts. Clayton hooked me up with a 3 link truss for my HP dana 30. Using 2" .250 wall for the 3 link arms, and the rear lower arms. Going with 1.75" .120 wall for the rear triangulated uppers. Pics of parts when they get here.