Stainless steel, 102" whip antenna outperforms all coil-type mobile CB antennas by any manufacturer. Full-size, ¼-wave antenna offers maximum efficiency in a mobile antenna. For best performance, use two antennas with a phasing harness. For replacement use or custom design.
* Whip-style antenna outperforms all coil-type mobile CB antennas by any manufacturer
* 102" stainless steel, full-size, ¼-wave CB whip antenna offers maximum efficiency
* Standard 3/8" x 24 thread fits all common CB mounts
Comments: Installed the antenna on the rear bumper. Cable went through an opening inside the back bumper and up through the wheel well. Kept the cable under the carpet up to the front dashboard using the passenger side. The cable was then fed under the dashboard to the CB radio. Approximately 15 - 20 minutes to install. Use a SWR meter to adjust the right antenna height.
Comments: Awesome. If you break this antenna then you already broke something else. No need to tune it because with a spring it's the size/type antenna that cb's are tested with in the laboratory. Check the SWR once to make sure all of your connections are good and that's IT.