I get bored pretty easily, so I felt it was time to change things up. The Kenwood headunit was pulled and sold to a friend. I decided a while back that I wanted to build a carputer or put a tablet in the dash. For a number of reasons, I settled on the carputer. I've been gathering all of the parts over the last few months and finally have just about everything I need. First order of business was getting the Lilliput EBY-701 touch screen monitor to fit. It comes in a double din trim ring, but still required a bit of trimming to get it to fit in my dash. Height was spot on, but width was a bit too narrow. Nothing a dremel, some fiberglass, bondo and lots of sanding couldn't handle! I'll keep this thread updated if there's any interest.