Hello! I'm having so many electrical issues after I had my dead '99 Wrangler 4.0 I6 engine swapped for a '96 Grand Cherokee 4.0 I6.
- Honk horn = windshield wipers go on
- Turn headlights on = both turn signal lights on solid + windshield wipers
- (When lights on and wipers stop) left turn signal on = wipers + left headlight blinks (starts slow and gets faster)
- Right turn signal on = blink fast (corner marker and rear blink)
When trying to narrow down my options to figure it out:
- Take wiper fluid plug off = wipers do not turn on when lights are on, but still does it when honk
- Take one of the two horn plugs off = wipers do not go off when honk
(No matter what I try, the left headlight blinks and the right turn signal goes fast)
Where do I start to try and figure the problem out or would it work if I were to buy a new wiring harness?
- Honk horn = windshield wipers go on
- Turn headlights on = both turn signal lights on solid + windshield wipers
- (When lights on and wipers stop) left turn signal on = wipers + left headlight blinks (starts slow and gets faster)
- Right turn signal on = blink fast (corner marker and rear blink)
When trying to narrow down my options to figure it out:
- Take wiper fluid plug off = wipers do not turn on when lights are on, but still does it when honk
- Take one of the two horn plugs off = wipers do not go off when honk
(No matter what I try, the left headlight blinks and the right turn signal goes fast)
Where do I start to try and figure the problem out or would it work if I were to buy a new wiring harness?