Freestyle713's Build Thread - Page 3 - JeepForum.com

Reply
 
LinkBack Thread Tools
post #31 of 191 Old 12-26-2012, 07:42 PM Thread Starter
Freestyle713
Registered User
1994 ZJ 
 
Join Date: Aug 2010
Posts: 2,380
Well, I had an exciting time driving around in this blizzard.

First of all, I almost hit a ****ing tree lol. Was coming into an empty parking lot, and the road into it makes a 90 degree turn, with a ditch on the outside. So as I was driving in, I start to slide. I hit the brakes, and obviously it does nothing. At this time im like **** **** **** ****. So I'm sliding towards the ditch at <5 mph, and I'm aimed right at a huge ****ing tree. I straighten my wheel so I don't damage anything when I hit the ditch. As soon as I hit the ditch I stop, and thank God I didn't hit the tree. Then I throw it in PT and back right out of it. Nothing like the threat of crashing to get the juices flowing lol.

Second, I'm coming up to an intersection with a gas station, where there is a cop car sitting. I saw him about 20 minutes before in the same spot when I passed by earlier. So its a red light, and I'm about to turn left up a big hill. Well, as I'm approaching the red light, the cop is getting in his car, and when the light turns green, hes right there ready to pull out. So I throw it in PT so I don't look like an ******* drifting around the corner. Needless to say he follows me. Driving up the hill, I just see his headlights get further and further away as I mozie on up the hill. By the time I get to my turn, which is quite a ways from the top of the hill, I see his headlights just coming over the top of it. So obviously he sees me turn. I go about a half mile down the road, through some s-curves, and turn into my road. Then I drive about 200 ft down the road, throw it in park, and turn my lights off to see if he followed me. Needless to say (again), he followed me (again). Just up that road was the High school, which is probably where he thought I went lol. It was funny as hell.

Attached Thumbnails
2012-12-26 20.41.10.jpg   2012-12-26 20.41.20.jpg   2012-12-26 20.47.59.jpg   2012-12-26 21.00.18.jpg  

94 Grand Cherokee 5.2 33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's

Quote:
Originally Posted by elcorvino View Post
Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.
Quote:
Originally Posted by ScottD16 View Post
I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.
Freestyle713 is offline  
Sponsored Links
Advertisement
 
post #32 of 191 Old 12-28-2012, 02:02 PM
nickpequignot
Registered User
1996 ZJ 
 
Join Date: Feb 2012
Location: columbia city
Posts: 2,829
Hey I think I have asked you this before but it has slipped my memory. But how is your light bar mounted in the "frame rails" I just got some 1in square tube from work and want to make a light bar similar to yours. Thank ya

96 limited build thread-http://www.jeepforum.com/forum/f13/96-limited-build-1351732/
nickpequignot is offline  
post #33 of 191 Old 12-29-2012, 10:23 PM Thread Starter
Freestyle713
Registered User
1994 ZJ 
 
Join Date: Aug 2010
Posts: 2,380
Went cruising around with my neighbor tonight. LOTS of snow on the roads. Ended up witnessing a hit and run and stayed on the scene for about 40 minutes. Was a head on collision between a chevy pickup with dealer plates and a minivan. We were about 100 yards behind the truck when it fishtailed into the other lane and hit the minivan. Immediately the 2 guys in the truck bolted, didn't even bother to shut it off, thing was billowing steam. So we stopped, made sure the lady and her daughter in the van were ok. My neighbor called 911. Waited about 10 minutes for a paramedic to show up, then about a half dozen more showed up another 10 minutes later, along with an ambulance and a state cop. Both of them were pretty much ok, just shaken up, and driver had a possible knee injury. They were both taken out on stretchers for precaution. The passenger ended up coming back, and told the cop who the driver was. Cop said they were bringing dogs, but we didn't stay long enough to find out. Either way the driver's ****ed. Might have been drunk, but IDK.

Also offered to pull out another girl and her father in a parking lot, but she said her dad was a cranky old man and that he declined. So ended up having a pretty exciting day, got to use my strobes twice. Probably the most action my zj's ever seen lol.
Attached Thumbnails
2012-12-29 21.35.32.jpg   2012-12-29 22.14.45.jpg  

94 Grand Cherokee 5.2 33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's

Quote:
Originally Posted by elcorvino View Post
Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.
Quote:
Originally Posted by ScottD16 View Post
I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.
Freestyle713 is offline  
post #34 of 191 Old 12-29-2012, 11:05 PM Thread Starter
Freestyle713
Registered User
1994 ZJ 
 
Join Date: Aug 2010
Posts: 2,380
Quote:
Originally Posted by nickpequignot View Post
Hey I think I have asked you this before but it has slipped my memory. But how is your light bar mounted in the "frame rails" I just got some 1in square tube from work and want to make a light bar similar to yours. Thank ya
Almost forgot, I saw some pics in your build thread lol.

94 Grand Cherokee 5.2 33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's

Quote:
Originally Posted by elcorvino View Post
Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.
Quote:
Originally Posted by ScottD16 View Post
I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.
Freestyle713 is offline  
post #35 of 191 Old 12-30-2012, 11:17 AM
nickpequignot
Registered User
1996 ZJ 
 
Join Date: Feb 2012
Location: columbia city
Posts: 2,829
Quote:
Originally Posted by Freestyle713

Almost forgot, I saw some pics in your build thread lol.
Do you have it just bolted in the the top of the unibody? Looks like you guys got quite abit of snow that way

96 limited build thread-http://www.jeepforum.com/forum/f13/96-limited-build-1351732/
nickpequignot is offline  
post #36 of 191 Old 01-01-2013, 08:13 PM Thread Starter
Freestyle713
Registered User
1994 ZJ 
 
Join Date: Aug 2010
Posts: 2,380
Quote:
Originally Posted by nickpequignot View Post
Do you have it just bolted in the the top of the unibody? Looks like you guys got quite abit of snow that way
Yeah pretty much. One bolt on either side.

94 Grand Cherokee 5.2 33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's

Quote:
Originally Posted by elcorvino View Post
Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.
Quote:
Originally Posted by ScottD16 View Post
I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.
Freestyle713 is offline  
post #37 of 191 Old 01-01-2013, 08:36 PM
nickpequignot
Registered User
1996 ZJ 
 
Join Date: Feb 2012
Location: columbia city
Posts: 2,829
Might just have to throw one of them together before I take grandpas welder back.

96 limited build thread-http://www.jeepforum.com/forum/f13/96-limited-build-1351732/
nickpequignot is offline  
post #38 of 191 Old 01-01-2013, 08:58 PM Thread Starter
Freestyle713
Registered User
1994 ZJ 
 
Join Date: Aug 2010
Posts: 2,380
Made some progress on my 8.8. Got the truss and brackets completely assembled. Just needs to be welded completely.
Attached Thumbnails
2013-01-01 12.42.29.jpg   2013-01-01 13.30.11.jpg   2013-01-01 13.30.21.jpg   2013-01-01 13.36.26.jpg   2013-01-01 13.36.37.jpg  

2013-01-01 13.51.41.jpg   2013-01-01 17.33.51.jpg   2013-01-01 17.34.07.jpg  

94 Grand Cherokee 5.2 33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's

Quote:
Originally Posted by elcorvino View Post
Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.
Quote:
Originally Posted by ScottD16 View Post
I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.
Freestyle713 is offline  
post #39 of 191 Old 01-02-2013, 08:09 AM
adavis39
Registered User
2002 WJ 
 
Join Date: Nov 2011
Location: Nashville
Posts: 2,808
thats a SUPER nice looking truss.....artec? tnt?

2002 WJ Limited 4.7: 6" Clayton REALLY long arms....yep, they are longer than yours SOLD : (
1998 Platinum 5.9 DD
2007 WK Overland 5.7 wifes DD
TNJEEPS.COM

BUILD: http://www.jeepforum.com/forum/f197/...-crap-1399123/

"In a world that he did not create, but he will go through it as if it is his own creation. Half man, half beast, whatever it is it is weird, it is ticked off and it calls itself Slash"
adavis39 is offline  
post #40 of 191 Old 01-02-2013, 02:40 PM
roughknight69
Registered User
1995 ZJ 
 
Join Date: Jun 2009
Location: Jamestown ny
Posts: 1,904
Quote:
Originally Posted by adavis39
thats a SUPER nice looking truss.....artec? tnt?
Pretty sure it's an artec
roughknight69 is offline  
post #41 of 191 Old 01-09-2013, 04:38 PM Thread Starter
Freestyle713
Registered User
1994 ZJ 
 
Join Date: Aug 2010
Posts: 2,380
After I did the brakes on my sisters WK, I installed a pvc oil catch that I got on amazon for $20. Super crazy fast shipping. I think I ordered it like 2 days ago, if that. Next step is to get rid of that stupid ricey blue hose that came with it. Also flushed my heater core, and managed to get water/coolant literally all over the walls of my garage in the process. Also sent a payment to another member for a mopar performance pcm.

Edit: Forgot to add that after I flushed the heater core, I threw a thermometer in one of the vents. It got up to 170*, and it was still climbing. I wish I did that before I flushed it to see how much of a difference it made. The real test will be tomorrow morning.
Attached Thumbnails
2013-01-09 16.30.34.jpg   2013-01-09 16.40.03.jpg  

94 Grand Cherokee 5.2 33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's

Quote:
Originally Posted by elcorvino View Post
Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.
Quote:
Originally Posted by ScottD16 View Post
I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.
Freestyle713 is offline  
post #42 of 191 Old 01-23-2013, 07:59 PM Thread Starter
Freestyle713
Registered User
1994 ZJ 
 
Join Date: Aug 2010
Posts: 2,380
Just found a 96 xj part out about an hour away from me. Who knows, I may be picking up an hp30 soon.

94 Grand Cherokee 5.2 33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's

Quote:
Originally Posted by elcorvino View Post
Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.
Quote:
Originally Posted by ScottD16 View Post
I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.
Freestyle713 is offline  
post #43 of 191 Old 01-24-2013, 06:37 PM Thread Starter
Freestyle713
Registered User
1994 ZJ 
 
Join Date: Aug 2010
Posts: 2,380
Ill be picking this up saturday morning for $150
Attached Thumbnails
ResizedImage951359070703930.jpg  

94 Grand Cherokee 5.2 33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's

Quote:
Originally Posted by elcorvino View Post
Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.
Quote:
Originally Posted by ScottD16 View Post
I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.
Freestyle713 is offline  
post #44 of 191 Old 01-24-2013, 06:50 PM
bananaslug
Registered User
1996 ZJ 
 
Join Date: Nov 2011
Location: upland
Posts: 1,452
Getting an Artec truss?
http://www.artecindustries.com/Front...-XJ_p_335.html

Id get 4.56s while you have the axles out.

Consider getting a Super 30 and Super 88 kit as well.

Might as well get ARBs or Ox lockers as well.


bananaslug is offline  
post #45 of 191 Old 01-24-2013, 06:51 PM
bananaslug
Registered User
1996 ZJ 
 
Join Date: Nov 2011
Location: upland
Posts: 1,452
oh and 35s
bananaslug is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome