[Bama_WJ]

That street party/riot is just pure insanity.

[Greengc4x4]

John, "the best" TB is F&B. But unless you want to spend 5-600 bucks, id go a different route, lol. Im going BBK 52mm. Its a sweet *** TB for the price

[BLACKzj52]

Originally Posted by Bama_WJ

That street party/riot is just pure insanity.

oh it was. it was so much fun though. one of my favorite experiences

Originally Posted by Greengc4x4

John, "the best" TB is F&B. But unless you want to spend 5-600 bucks, id go a different route, lol. Im going BBK 52mm. Its a sweet *** TB for the price

**** me. thats right theyr that much. i completely forgot. i figured 400 max. guess ill just go bbk. theyr $350ish correct? i havnt really looked in awhile. i prolly will start doing some research tomorrow and potentially make an order for something

[Greengc4x4]

BBK is right at 299. Through kolak you can get it for 290. ill pay 10 more to get it within a week though. lol

[BLACKzj52]

cheaper than i thought
might order one tomorrow. and agreed on the $10 more. I dont mind waiting for my parts if iim getting alot of $$ off from kolak. he got me ujoints for half the price anybody else wanted ($13 apiece vs $30..x5 ujoints), so i could justify that wait.


that and prolly some front 20% tint (i know youll like that one roger )
might take my 5.9 vents, grille, and side mirrors to get painted, and order a dc controller too. yeah i got some money to blow.

[squashman702]

Did you look at Fastman TB's? Should be somewhere around 250 for a 52mm I believe. There's also the guy that ports stockers on dakota-durango for $95 shipped. I had one on my 5.9 and it's pretty clear that the guy puts a lot of time into cleaning them up and porting them.

[BLACKzj52]

^talked to davit, ross, and greg (sf dudes) on blackberry messenger just today. fastman isnt any better than the bbk, and the bbk is billet. = blingg$$$$$. lol.

looks like ill need some further valvetrain support mods for the cam.
-behive springs
-hardened pushrods
-new timing chain
-new gaskets

but itll be worth it when i see a 100hp increase over what i currently have!

just found this vid. krc 210x or equivalent cam specs..sounds soooooo good
YouTube - jeep 5.9 with cam

[AEagle326]

so the ZJ will be out of action for even longer?

thats a gnarly cam. do you/will you be getting new valve rockers when you get it?

[BLACKzj52]

no it wont be out of action. ill be picking up a 5.9 engine, whether it be from nash or roger. and will build that on the side.

ill be getting harland sharp 1.6 roller rockers, so yes

[BLACKzj52]

just came in

[GraKee99]

Can you send me one black lug nut? I lost one of mine and have a silver now.

[AEagle326]

Originally Posted by BLACKzj52

no it wont be out of action. ill be picking up a 5.9 engine, whether it be from nash or roger. and will build that on the side.

ill be getting harland sharp 1.6 roller rockers, so yes

i hate you i hate you i hate you because thats exactly what ive been wanting to do

[Virmagicus]

Originally Posted by BLACKzj52

YouTube - jeep 5.9 with cam

I vote lift.

That motor sounds like *** btw.

[BLACKzj52]

Originally Posted by GraKee99

Can you send me one black lug nut? I lost one of mine and have a silver now.

send me an address. I only need 16 of them lol

Originally Posted by AEagle326

i hate you i hate you i hate you because thats exactly what ive been wanting to do

Originally Posted by Virmagicus

I vote lift.

That motor sounds like *** btw.

i wouldnt be lifting it any higher, it was just between motor and rear long arms

[JFox21]

Originally Posted by BLACKzj52

i wouldnt be lifting it any higher, it was just between motor and rear long arms

What about front long arms?