BLACKzj52's Build Thread - Page 52

BLACKzj52 · 12-02-2009, 12:04 PM

Quote:

Originally Posted by Greengc4x4

Here john, here is what my boredom leads to

Im obviously joking

= peoples reaction to your painted woodgrain

= peoples reactions when you say you're going to adjust your tranny bands, again

= peoples reaction when you pull out your tools to work on your Jeep, because they know It'll get broken some more

= people's views of the 8000 super 44 videos you've made

= You bragging about your super 44

= My reaction when I hear a 5.9 with a super 44 compared to a 5.2 with a super 44

hey i like my painted woodgrain!

and this time im adjusting my front tranny band. never done the front before. iv done the rear twice

BLACKzj52 · 12-03-2009, 04:29 PM

if money permits,
im thinking ill build my own long arms this summer. up front ill got with a claytons style radius arm setup. and in the rear im thinking double triangulated like Neils (fortcollinszj) setup.. pics

BLACKzj52 · 12-09-2009, 07:39 PM

these just arrived today from CCOR

I gave the same guys a call today to check their gear prices for HP30 Yukon 4.56s. Dam good price, Ill probably order them tomorrow. Think my mom is ordering my 44a gears here shortly for my christmas present, and I talked my dad into getting me the MVC truss/skid yesterday for christmas as well (divorced parents = 2 christmas'

)

this might get fixed sooner than I originally planned.

**squashman702** · 12-09-2009, 08:00 PM

You trying to get it driveable over winter break?

Your rack is under 8" of snow, and I don't have one of the cross bars, otherwise it'd be in the mail.

BLACKzj52 · 12-09-2009, 08:25 PM

i was aiming to at least have it 2wd'able. was thinking of maybe buying 2 cheap *** bearings and throwing them in the front just so i can have 4wd for the winter if needed. wouldnt worry about blowing them up because the hp30 is getting built

how you missing a crossrail?

**squashman702** · 12-09-2009, 08:30 PM

Quote:

Originally Posted by BLACKzj52

i was aiming to at least have it 2wd'able. was thinking of maybe buying 2 cheap *** bearings and throwing them in the front just so i can have 4wd for the winter if needed. wouldnt worry about blowing them up because the hp30 is getting built

how you missing a crossrail?

It's the one I had the Hella 500's mounted to for a bit. I got sick of listening to the wind noise with the sunroof open, so I took that rail off. Needless to say it's in my parent's garage 150 miles away.

You don't need 4x4 for the winter, tokyo drift that **** wherever you need to go.

ZJcrawler45 · 12-09-2009, 08:32 PM

Screw the radius arm setup. Make it a 3link.

how much did those install kits cost you? looks like i might be rebuilding my d30, or maybe an hp? hmmmm

BLACKzj52 · 12-09-2009, 08:39 PM

Quote:

Originally Posted by squashman702

It's the one I had the Hella 500's mounted to for a bit. I got sick of listening to the wind noise with the sunroof open, so I took that rail off. Needless to say it's in my parent's garage 150 miles away.

You don't need 4x4 for the winter, tokyo drift that **** wherever you need to go.

well of course, hell the aussie out back will do that on its own in the snow. But I could prolly also go around and pull people out if we got snow and charge them like $10-$20. or at least my friend had that idea lol.

Quote:

Originally Posted by ZJcrawler45

Screw the radius arm setup. Make it a 3link.

how much did those install kits cost you? looks like i might be rebuilding my d30, or maybe an hp? hmmmm

eh, we'll see.
$222 shipped. go hp30.

-cAcHe- · 12-10-2009, 12:08 PM

222 shipped just for the install kits?

NVM... i went back and looked for the CCOR quote and its around that price..

BLACKzj52 · 12-17-2009, 04:48 PM

yukon d44a 4.56 gears ordered.
yukon hp30 4.56 gears should be ordered whenever money transfers from my paypal to my bank account

Greengc4x4 · 12-17-2009, 05:21 PM

Quote:

Originally Posted by BLACKzj52

yukon d44a 4.56 gears ordered.
yukon hp30 4.56 gears should be ordered whenever money transfers from my paypal to my bank account

I didnt think yukon made gears for the 44a?

Edit: NVm, Im thinking higher than a 4.56

**squashman702** · 12-17-2009, 05:41 PM

You doing the rebuild/regear yourself?

BLACKzj52 · 12-17-2009, 06:27 PM

Quote:

Originally Posted by squashman702

You doing the rebuild/regear yourself?

hell no. iv got a couple options to sort through tho. iv my buddy has time, i assume he'll do it for a 12 pack.. maybe a 24

oh and just bought one of these
96 97 98 JEEP GRAND CHEROKEE Cup Holder Insert ZJ:eBay Motors (item 280435059024 end time Dec-08-09 06:47:54 PST)

^^go to kolak though, he sells them cheaper. $20 shipped ftw

BLACKzj52 · 12-20-2009, 03:02 PM

-found somebody to do my gears for next to nothing
-more progress on the interior
-4.56 hp30 yukons will be ordered tomorrow
-good possibility of getting a free 5.9 engine this coming summer (will need rebuild however)
-good possibility of getting this job i interviewed for on friday

-hp30 completely torn down except bjs/knuckles and upper CA bushings (btw anybody got any good ideas for removing those bushings?)

stay tuned, big things are in the works

**_Kyle_** · 12-20-2009, 04:50 PM

Quote:

Originally Posted by BLACKzj52

-found somebody to do my gears for next to nothing
-more progress on the interior
-4.56 hp30 yukons will be ordered tomorrow
-good possibility of getting a free 5.9 engine this coming summer (will need rebuild however)
-good possibility of getting this job i interviewed for on friday

-hp30 completely torn down except bjs/knuckles and upper CA bushings (btw anybody got any good ideas for removing those bushings?)

stay tuned, big things are in the works

Cut out the rubber then beat the hell out of the metal to get them out if you don't plan on reusing them. Otherwise, you can attempt to press them out. They are a real PITA.