NV241OR problem? - JeepForum.com
Sign Up   Today's Posts
User: Pass: Remember?
Advertise Here
Jeep Home Jeep Forum Jeep Classifieds Jeep Registry JeepSpace Jeep Reviews Jeep Gallery Jeep Clubs Jeep Groups Jeep Videos Jeep Events Jeep Articles
Go Back JeepForum.com > General Technical Discussions > Engines & Drivetrain > NV241OR problem?

Baseline 4x4 Lifetime Warranty 4340 Chromoly Axle Shaft KiClayton Off Road WJ Long Arm Kits!Clayton Off Road - JK Prototype Gas Tank Skid

Unread 06-23-2013, 10:26 AM   #1
Registered User
Join Date: Jun 2013
Posts: 1
NV241OR problem?

I just put a 241 in my jeep and it feels like there is slop in the transfer case. When you start out and release the clutch, you will hear a clunk sound coming from the transfer case area. The sound remains while shifting through all 6 gears and reverse. Also if you let off the gas and then come back on the gas you feel and hear the same noise. The drive shaft is a new Tom woods cv style. The front drive shaft is not on for diagnosis purposes. Noise and slop also in 4hi and low. Detroit locker in the rear ( same locker in my cj and I don't have this problem). New track bar bushings front and rear. New ball joints and tie rods in the front. Everything appears to be tight. Any help would be great, thanks.

listm79 is offline   Reply With Quote

Jeep, Wrangler, Cherokee, Grand Cherokee, and other models are copyrighted and trademarked to Jeep/Chrysler Corporation. JeepForum.com is not in any way associated with Jeep or the Chrysler Corp.