something easy is using climbing rated carabiners, i have my recovery gear and jumper cables in a gym bag (couldnt find anything better yet) and just hook that to one of the tire tie downs on the floor with a biner, the weak link is going to be the method you use to attach the biner to the box but cable or chain would work wonderfully
Can't I just connect a cargo net at 4 corners of the trunk on those little stock hooks?
"Approximately 80 percent of our air pollution stems from hydrocarbons released by vegetation, so let's not go overboard in setting and enforcing tough emission standards from man-made sources."
The little hooks that are level with the windows are for a cargo cover, not as a tie downs. The ones on the floor are for tie downs. Although a net on the top is better than nothing.
"Dee", a Patriot Blue 2001 Cherokee Sport 4.0L High-Output PicturesBuild Thread The Rocket Sheep "Live Free Or Die; Death Is Not The Worst of Evils." -General John Stark
Originally Posted by speedbucket
perfect depends on how far away you are when you look at it:D
Originally Posted by Millermagic
It's a 4.0 ... as long as there's something in the crank case that isn't coolant I'm sure it will still run forever.
Flushed the heater core now I have a heater again.
1992 Jeep Cherokee Laredo 5 speed, 4x4, 149k miles, all skids, tire carrier, cargo cover, factory radio/speakers, 10k miles on following items; rebuilt motor, new tranny, rebuilt rear diff, complete exhaust system, complete brake system, radiator, 30" tires, suspension. No dents or scratches in the paint. ONE OWNER UNTIL NOW.
So my project for this weekend/today was gonna be to paint my flares and put them back on since i got pulled over for my tires not that long ago(got off) and also if i put the flares on it hides the dents in my front fenders sorta lol. SO i go and spend 30 bucks on nuts/bolts/paint etc. Then mock up a front one to test how they fit. Ehhhhh looks like *** screw that! So instead i decided to paint where my flares would be with bedliner. Used the Duplicolor stuff last time but couldnt find it anywhere so went with Rustoleum. WAY better. Has a way better nozzle, texture is alot rougher and looks overall better. Anyways blah blah only got the left side done today (I goof off too much) but heres pics lol.
Looks good to me. Oh and saw this on my way back from Lowes. My flag says the same! Surrender the BOOTY!