[teamskiawa]

so i worked all week to prep, and then today was the big day, i went up to auto zone bought two cans of rustolum bed liner, when i did one side of my jeep, the can i used was defected, it came out all funny and now i got runs, i used the other can on the other side and it cam out fine, so most of the runs are barley visible, cuz of how the bed liner sets, its not like paint, but i have a couple really bad runs.

So can i take some sand paper and sand the runs, then put another coat on. does that sound like a good plan, other than that i love it, it looks great.

[leftlanetruckin]

Let it fully cure (a few days normally), then get some wet and dry and sand it back to where the run becomes level with the rest of the paint.
I would use some 400 wet and dry and a sanding block for the bedliner type paint. I used the same thing last week on this rack I made for the kids dirt bikes, and it was a PIA to get on compared to paint




Martin

[teamskiawa]

should i use it wet or dry

[leftlanetruckin]

I would use it wet. It may take longer but you will do less damage to the good paint that way.

Martin