-   XJ/MJ Cherokee Non-Technical Forum (
-   -   crockett's 92 xj build (

crockett07 03-10-2011 12:40 PM

crockett's 92 xj build
k so i finally got my xj running right. my dad had this xj and the throw out bearing went out in it, well he had trouble pulling the tranny and gave up on it. i offered him 400 bucks and made it mine. few days later me and a buddy towed it to our place to work on it. cause of work he havnt had much time. well yesterday i pulled the tranny replaced the throwout bearing, and went ahead and replaced the clutch. 5 hours later from start i had everything back together and ready to fire her up. well she diddnt fire. turned over and over but no fire. checked the fuel pressure its all there, so its 9 at night and im tired of working on this thing so i head in the house. this morning i went out in the shop and noticed i diddnt bolt the crank position sensor back to the bellhousing. bolted it back up and she purrrrrred.:2thumbsup:
so this is my xj
92 4.0 h/o 5 speed, 2wd
future plans are:
fab roof rack, and bumpers
4wd conversion
4" lift on 33's
window tint

crockett07 03-17-2011 07:30 PM

update: not anything special but my muffler was rusted to nothing so i cut it off and went and got a flowmaster super 44, ran the pipe out the back and welded a 4 inch chrome tip at the end. can barely hear it in the cab and outside it has a nice rumble. very happy with it

crockett07 01-12-2012 07:17 PM

its been a while but heres a little teaser

crockett07 01-22-2012 12:01 AM

went to the only pick n pull left around here today looking for my 4wd parts, and found this
couldnt find a manual 4wd transmission and transfer case so i just settled for the dana 30 that i scored for $50. gunna throw it in when i do my lift in a couple of weeks.

crockett07 02-03-2012 05:35 PM

1 Attachment(s)
i know my thread isnt that interesting but its about to be.
31x10.50x15 bfg mud terrain km2's check.
dana 30 front axle check.
and 4.5" rc lift kit check.

everything is going in tomorrow. all bolts have been pb blaster'd and im ready to do this thing. wish me luck, will post pics when im done

Supertramp11 02-03-2012 06:53 PM

what rims you got there theyre slick?

crockett07 02-03-2012 07:55 PM

they're pacer low gloss alluminum 15x8's

crockett07 02-04-2012 06:49 PM

lift is finished. took all day but its in and ive got my dana 30 in the front. everything went pretty smooth except the rear springs. thought id never get them in but here it is
o and within 5 miles i finally experienced death wobble. so i guess ill get to that soon enough. need an adjustable track bar as of right now.

CDW_327 02-04-2012 07:07 PM

Wait so you were planning on using your xj to tow your Yj on 38's that's probably weights around 4000 pounds? Not being mean but a half ton truck is barley up to that task.

Nice xj though! And score on the d30.

crockett07 02-04-2012 11:37 PM

thanks. especially now i realize how unpractical that idea was. but now the yj is gone and all my attention is focused on the xj

doogie 02-20-2012 09:33 PM

Love the look man, wheels and tires look great.

How do you like the KM2's? I keep going back and forth between KM2's and All Terrains just because I know the AT's will last 70,000 miles or so. How quiet are they at interstate speeds?

crockett07 02-21-2012 08:37 AM

the kms's pull great offroad. especially for only being 2wd right now. they're not that loud really. if you have the windows down and the radio off u can hear them but nothing the radio cant drown out :)

crockett07 02-25-2012 11:45 PM

guess i might be getting my jcr DIY bumper sooner than i anticipated. left to go hunting tonight and my buddys gf parked her jetta behind my jeep. no back up lights led to my bumper on top of her hood. crinkled it up real nice :shhh: bumper got a lil dent in it but nothing serious except an excuse to upgrade. ill get pics in the morning

MN_XJ 03-21-2012 10:12 PM

nice xj.

how much were those rims? i really like them.

crockett07 03-23-2012 07:39 PM


Originally Posted by MN_XJ (Post 13280819)
nice xj.

how much were those rims? i really like them.

i payed $110 a peice for them at my local tire shop. i think they look better than the cragers because they have more depth.

on another note, today ive dropped the transmission for the 3rd time since owning the jeep. something came loose inside of it and im tired of dropping it so i went and bought another transmission from the junkyard to hold me down until i can get all the stuff to finish the 4wd coversion

The time now is 09:57 AM.

Powered by vBulletin Version 3.8.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.