3/4 ton 98 XJ for sale w/ gofast suspension
ideally, i'd love to sell it whole. it would come with a bunch of extra parts listed below. there are a few quirks here and there but this jeep is 100% DD-able, will do 75 on the highway all day, wheel the whole weekend and drive back home.
98 XJ Sport, 4.0/AW4/231
111,100 miles, rotella synthetic run for the last 11k. engine has received a stellar bill of health via oil analysis from blackstone labs. motor was recently tuned up and has a new distributer. jeep was lifted/axle swapped at 100k miles, ive owned the jeep since 86k, and have worked on it since ~60k miles. i bought it from a friend and i am the third owner. maintenance was always done on time, it was dealer maintained by the first owner. jeep has been wheeled but never beaten on. there are only 3 actual wheeling trips on this rig.
99+ intake manifold
THOR cowl intake
cat replaced with OEM at 90k
flowmaster 50 muffler
brown dog poly motor mounts and engine brackets
new CSF radiator and fan clutch within the last year
valve cover gasket replaced less than 1k miles ago
AW4 filter screen replaced and fluid flushed last summer, temp gauge and external cooler fluid installed and it runs at 100F on the highway, never gets into the yellow around town.
new A/C compressor but it has a slow leak somewhere (works great when charged)
231 has HD SYE (not sure of brand)
1978 ford HP44
513 yukon gears, OX locker, reid knuckles, nitro alloy shafts and 760x joints
parts mike highsteer knuckle on passenger side for true crossover steering
tie rod is heims over the knuckle, drag link is TREs, trackbar heims as well.
PSC hydro assist kit with cooler and delphi "fast" ratio box... faster than stock, not the race box however.
warn premium hubs, stage 8 locking locking spindle nuts
all seals, bearings, brakes, ball joints etc are new
custom truss and inner C gussets, uses factory XJ/TJ/ZJ control arm bracket geometry
late 80s ford D60-ISU
513 gears, lock right locker, disc brake kit, factory 35 spline shafts, ballistic cover and axle bridge
rock krawler 4 link kit, deaver 5.5 coils and G9 leaf springs
hdoffroad shackle relocators and RE 1.5" shackles
custom valved bilstein 9100 shocks... 11" travel 2.5 weld top fronts with remote resi and 13" travel 2.0 rears with remote resi. rear shocks are threaded for coilover hardware.
jeep is plated front to back with hd offroad stiffeners, with extra stiffening on the inside, outside, and bottom of steering box area. jeep is also caged (not finished) with a hybrid-style cage using 1.75x.120 DOM tube. rockers were cut out and replaced with 2x5x.25 wall box tube.
other extras include a TNT belly skid, DPG gas tank skid, JCR corner guards with LEDs, dirtbound offroad rear bumper, and custom front bumper/crossmember replacement. hella DOT H4 headlight upgrades with harness, hella micro DE fog lamps, LED rock lights and reverse lights and a LED lightbar (which may or may not be included with the jeep). there is a prime4x4 switchpanel in the jeep as well as a marine fuse box in the engine bay for extra accessories. also has heated mirrors, factory overhead console, LED interior lights, and a viper remote start/keyless entry system.
tires are 35" MTZs on H2 wheels.
if the jeep is sold as a whole, i will include all the extra fab parts/gussests/tabs and spares i have including warn m8000 winch and synthetic rope (maybe), limit straps, spare 35" BFG AT mounted on H2 wheel, spare 35" MTZ with ~25% tread, and three 22' sticks of DOM to finish the cage
share a link to this item
share a link all items by XJLI
Share this item on other forums
Embed on eBay!
|01-31-2014, 03:04 PM||#5|
want it? lets talk! live in california? thats fine, get out here and drive this thing home.
|03-13-2014, 11:10 PM||#8|
Hey bud what's up with the doors I'm buying a xj to build and I was upset cause I thought the wrangler was only one that was easy for doors to come off ..I'm from rochester ny maybe u can reply or personal message me