[STW]

Help make a backspacing data base.

Stock TJ wheels:

Grizzly: 15x7 BS: 5.5 (?)
Gambler:
Canyon:
Moab:
Ecco:

Other stock TJ wheels I'm not listing?

Popular aftermarket wheels for TJs?

Include pics of any of these wheels.

Thanks.

[PackMan]

Moab 16x8 5" bs

Aftermarket:

American Racing Chamber 15x8 3.75" bs

[JustANeon]

skipped the Ravines

[SecondTJ]

Canyon and Ravine are 15x8 with 5.5"
Gambler are 15x8 with 5.25"
Ecco are 15x7, not sure of backspacing. would guess 5.5" also.

[Wheelin98TJ]

Grizzly: 15x7, 5.5" backspacing
Gambler: 15x8, 5.25" backspacing
Canyon: 15x8, 5.5" backspacing
Ravine: 15x8, 5.5" backspacing
Moab: 16x8, 5" backspacing
Ecco: 15x7, 5.5" backspacing


There's a few other wheels too that I'm not sure of the specs on - The Alcoa wheels on the Tomb Raider edition and I think there is a 16x8 wheel that was available on Saharas at some point.

[STW]

Thanks. Didn't realize all the stock wheels except Moab were the same BS.
So the Moab wheels would only give 1/2" more clearance on the inside right?

What aftermarket wheels have 4.5-4.75 BS?

[ScottD06X]

Originally Posted by STW

Thanks. Didn't realize all the stock wheels except Moab were the same BS.
So the Moab wheels would only give 1/2" more clearance on the inside right?

What aftermarket wheels have 4.5-4.75 BS?

15X8 - 4.5 backspacing

http://picasaweb.google.com/scotdial/MyJeep/photo#5054082801662609170

[wdw]

American Eagles 15X8. 4.5 backspacing. 31x10.5 tires.

http://usera.imagecave.com/tugger/myjeepupdated.jpg

[98_TJ]

sorry this may be a little off topic but i was wondering would cragar 397 15x8 with 4 inch BS fit on a stock TJ with 31x10.5 AT

[otisdog]

Originally Posted by 98_TJ

sorry this may be a little off topic but i was wondering would cragar 397 15x8 with 4 inch BS fit on a stock TJ with 31x10.5 AT

Yes as long as the bolt pattern is 5 x 4.5"
Jim

[98_TJ]

great that means no rubbing issues, as you can see im a noob and this is my first jeep

[SecondTJ]

Originally Posted by 98_TJ

great that means no rubbing issues, as you can see im a noob and this is my first jeep

you can run 31x10.5 without rubbing issues on stock wheels. (well, you might get a little rubbing, but a few washers under the steer stops fixes the problem in about 5 minutes.)

[98_TJ]

thanks for the quick responses, wow you guys on here are alot friendlier than the guys on the evolution forums

[Levonius]

If anyone was wondering for aftermarket with bigger wheels:
15x10 Rims w/ 35" Tires you have 5x4.5 bolt pattern w/ 4" backspacing.
Comments?

[AKGeo]

Cragar soft 8 15x8's 4" backspace. Sticks 1" of tread on a 31x10.50 BFG AT out of a stock TJ fender flare. I rubbed on stock Canyons with 31" MTRs.