[JeepEngineers]

Originally Posted by ahmed255

I noticed in Star Scan that there two thresholds for the Tire pressure gage sensor system, the first at 20 psi and the second was at (I think) 7 psi.

The alarm goes off at 20 psi, what happens when it reaches 7 psi (the lower threshold?

If we're talking WK/WH, the placard value for front and rear tires is 33 psi. The low tire pressure will alarm at 26 psi, which is a differenance of 7 psi. For XK/XH placard is 35 psi and low tire pressure at 28 psi, also a differance of 7 psi. Not sure if this is what you are seeing in the starscan, but this is the basics of the TPM system.

[BigPoppaJNutZ]

Originally Posted by JeepEngineers

We're not sure right now what you can or can't enable since we don't have StarScan right here with us....

We'll have to get back to you after doing some research - after the thread closes, we go back and follow up on unanswered questions, so keep checking back!

I really don't know much (yet) about the Star Scan and the interface with the XK and if you can program things in. However, I would suggest that if it is possible please look at adding open "functions" or files that can be programmed if someone actually knows the coding. That or just get busy making all kinds of goodies for us!!

Thanks again!!!

[JeepEngineers]

It's after 7:00 again! Thanks for your interest - we have a few open questions that we will post answers to over the next several days.