Jeep Enthusiast Forums banner

zj front cv style driveshaft

558 views 1 reply 2 participants last post by  trailblazr81 
#1 ·
Does anyone know if the flange on the front axle of the v8 zj axle, does that come off so i can replaced with the front driveshaft and pinion flange from a 6 cyl zj.. want to get rid of the cv style ds.. anyone done this, i just dont know how the axle flange from my v8, previously 249 , comes off
 
#2 ·
I found on Ebay a direct bolt on replacement U-Joint driveshaft when I grenaded my CV shaft first time out wheeling. I think this is the one I
got...

You may be able to remove the pinion nut and change out the yoke, nut Im not sure if the length would be correct with the 6 cyl. shaft.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top