Jeep Enthusiast Forums banner

ZJ blower motor problem

1K views 1 reply 2 participants last post by  Foundrydude 
#1 ·
Question: on my son’s 97 ZJ with 4.0 manual temperature control. Blower motor quit working, so we pulled it and checked the voltage at the motor connector, around 5 volts, checked the blower resistor and got voltage there. Blower motor works outside the vehicle, and a new resistor did not make any difference, my son had already purchased this. Checked the ground on the blower motor got no connection, so we bypassed the ground and routed a new ground, now the blower motor blows full force all the time, even with the ignition off. Any suggestions, and yes I searched the forums, Thanks, John
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top