Nick I made the mount out of a piece of flat steel.
Whenever I get my cb I'll see what grandpa has layin around to make one.how hard is it to take the tail light out? And did you use a preexesting bolt?and how did ya run the coaxial into the cab. Sorry for all the questions I'm new to CBS and don't know a lot about them
I ran the hot wire straight to the battery with an inline fuse and the ground is on a bolt under the console. The coax is run under the console under the carpet and back seat, under the left rear wheelwell plastic and thru the same hole as the taillight harness
i drilled a small hole and used a much bigger self tapping screw to mount the antenna bracket and it is holding fine. when drilling the hole for your antenna drill the hole just big enough for the plastic washer to fit snuggly in.
If you need more details shot me a pm and i'll explain in more detail.
^ That's exactly where my CB and mic sit. It's about the best spot a ZJ has. Oh, and as a tip, a 3D or 4D mag-lite slides in between the center console and the ashtray perfectly and stays in pretty well too.
Took her to town and took it to the car wash. They did a crappy job. Ohwell. I adjusted my driving lights and cleaned it out. Put tools away from putting my switch in the Vic. I got all my tools in a tool box ini the back. And my husky tool kit thing I got from lowes fits good I between my sub box and the right side wall. And I found out i really need seat covers. My gerber caught on the crack and ripped the Leather even more.i reset the over head thing for mpg and I drove it like a pooch and got it 20 on the average. Haha. We will see what it gets to as I drive it more.
[B]94 Grand Cherokee 5.2[/B] [SIZE="1"]33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's[/SIZE]
[CENTER][COLOR="Yellow"][URL="http://www.jeepforum.com/forum/groups/zombie-outbreak-response-vehicles/"][COLOR="Yellow"]Zombie Outbreak Response Team[/COLOR][/URL][/COLOR][/CENTER]
[QUOTE=elcorvino;14544406]Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.[/QUOTE]
[QUOTE=ScottD16;14460352]I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.[/QUOTE]
Put an alternator in. Took all day because we screwing around the whole time. Started it and the alternator was junk just squealed and didn't charge. Just in time to not be able to get another til monday
97 ZJ with 31x10.5 Ravines spacers 2" bb rough country shocks 8 kcs 204k xj marker light doorless