did this to her. She doesnt like it when I "tear up" her insides.
trying to find the source of my "dash" lights not working/working when they want. tried a different headlight switch from U PUll It, not it. still have the problem. will try messing with the dash console itself. see if something is making a bad contact or soemthing.
It's the headlight switch. Replacing with a JY switch is just exchanging 1 POS for another. Check the stickies for a writeup on the fix for it. The fix won't last forever, but it'll help.
Replaced my idler pulley and belt. No more squeal Also had to replace my turn signal bulb in the passenger tail light.
You might want to make sure you have enough blinker fluid, because if you dont the bulb will keep going out.
[B]94 Grand Cherokee 5.2[/B] [SIZE="1"]33in. Federal Couragia M/T's on Procomp Steelies, np231 swap, IRO Hack n Tap SYE, Carolina Driveshaft, 4.5 in. lift, RE front upper/rear lower ca's, RC front lowers, Ironman rear uppers, IRO 4.5 coils in rear, 3.5 and 2" bb (no isolators) in front, Bilstein 5100's, Clayton/JKS adj. track bars, KOR rad support and SS, Magnaflow/Flowmaster exhaust, clear corners, custom light bar w/ Hella 500's[/SIZE]
[CENTER][COLOR="Yellow"][URL="http://www.jeepforum.com/forum/groups/zombie-outbreak-response-vehicles/"][COLOR="Yellow"]Zombie Outbreak Response Team[/COLOR][/URL][/COLOR][/CENTER]
[QUOTE=elcorvino;14544406]Yea... It's kind of like the fat chick who lives around the corner. You aren't trying to get caught with her, but you know she'd be a good time.[/QUOTE]
[QUOTE=ScottD16;14460352]I had a dream my entire family was attacked by a giant polar bear. The crazy part was he attacked us with a giant spoon. Best dream ever.[/QUOTE]
Today I put the factory sport aluminum rims back on and pulled the Cherokee rims off and broke them down. Going to give them a light sanding and then some new paint before I put some Wrangler Radials on them.
Own a Grand Cherokee? Click Here. [URL="http://www.jeepforum.com/forum/f197/jeepforum-grand-cherokee-member-locations-1162687"]http://www.jeepforum.com/forum/f197/jeepforum-grand-cherokee-member-locations-1162687[/URL]
Got tired of all the clunks and rattles so I crawled under it, over it, in it and out of it......
ended up replacing the front sway bar end links and bushings, for some reason the PO had the wrong diameter bolts in the rear shocks so they clunked over every bump and I went to walmart and purchased 1 70' roll of self-adhesive weather striping for $2.##, took off the plastic panel for the tailgate and put the weather striping between the plastic and the metal to stop the annoying rattle that was every growing louder