JeepForum.com

JeepForum.com (http://www.jeepforum.com/forum/)
-   ZJ Grand Cherokee Forum (http://www.jeepforum.com/forum/f13/)
-   -   RV cam for 360? (http://www.jeepforum.com/forum/f13/rv-cam-360-a-1515388/)

SpenceAK 04-27-2013 03:59 PM

RV cam for 360?
 
is it a good choice? is tuning necessary? or should i run something else or stay with a stock cam? ill be running the stock iron heads. I was looking into a stroker but my budget wont allow mainly because of shipping costs.

HighLonesome 04-28-2013 10:22 AM

If you are running a '95 OBD1 engine controller, I would stay away from any cam that isn't pretty close to stock since you can't tune. I've heard a 5.2 cam works well in a 5.9 :)

ratmonkey 04-28-2013 11:23 AM

The Hughes rv/towing Cam is obdi computer friendly. Its a good Cam for a stock magnum motor.

SpenceAK 04-28-2013 01:23 PM

ive read that it gives good low end torque and its good for highway speeds. since this engine's purpose is for off road fun. do you think its a good choice?
pretty much gonna keep it simple and stick to a stock 360 build. This is for a ZJ 5.9
thanks for the advice


The time now is 04:09 AM.

Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.