It's too big I think at 15". The biggest one I could fit without cutting was 11"x 11"x 3/4 thick. Don't get a fin and tube they are too delicate. Get a plate and fin or just a plate. Here is the one I have. I didn't use their mounting ties. I bolted it to the A support instead so it;s not touching the condenser. http://www.amazon.com/Hayden-Automot.../dp/B000C3BBKS
Originally Posted by jabba974
"And yes, there is always a torque spec...but its not necessary...and takes way to much time...."